Bluegill - Big Bluegill

Do you love big bluegill?

Views: 531

Replies to This Discussion

This rotisserie motor is what I use to power my dryer.  I keep my poppers rotating until the finish dries/sets up other wise it will sag.   The pour-on in the picture has a real long pot time but takes a long time to set up, I will let it turn four to six hours and then let it dry overnight. It drys very clear and I haven't had any issues with tackiness after 24 hours.  As you can see it was very simple to construct the dryer. I cut 3 circles from scrap wood, the diameter was the same as a 12 ounce coke can, then drilled a hole in the middle of the circle then glued it to a dowell.  the foam came from an old coozie (canned drink insulator sleeve) and was slipped on and is easy to replace when it starts getting worn.  Commercial dryers turn a little faster than 1 RPM but this seems to do the  trick.

Great stuff mark thanks for sharing.

I have a rotsserie motor I use for various things, rods and occasionally bug, but it turns about 6 rpm's .  I have known of guys using the motor from microwave turntable for similar purposes, which I think are a little quieter than what I have experienced with rotisserie motors.  That looks like a very well designed and versatile setup you have there.

I used a microwave oven plate turner motor out of an old broke oven. It works just fine but I just have one disk attached for holding the poppers.

What a great idea, we have some great minds here.

here's my paint area. my dryer is in the back left.

sorry about the picture its the wrong one. I don't think it loaded anyway.

I guess the picture answered my question. Is that finish a polyurethane. Ive been using epoxys and haven't really found one that does what I want.

the finish pictured above is a 2-part epoxy "envirotex lite"

I have a friend that likes "BSI" two part epoxy that has a 30 minute cure time I think I will give that a try because some times I get tired of waiting for the "envirotex lite" to cure.  

Also popular for finish is a glue called "Liquid Fusion" with the added advantage of  no mixing required.

When I am playing around with a new design I will use uv light cured finish that dries almost instantly; but not practical if  you are doing 40 poppers at a time.

i think a product called liquid fusion is a good epoxy alternative.i think it also must be dried on a wheel

clever design John; very appealing to the eye!! bet you had no problem selling them!!  I sold my turner with a rod wrapper i built on craigslist last Saturday replaced it with a CRB rod turner that easily adapted to a fly dryer.  If I came across some motors like yours with those clean lines I would make a permanent turner dedicated only to fly tying.

RSS

Latest Activity

John Sheehan commented on John Sheehan's photo
Thumbnail

Clinton Reservoir Smallie 2

"Thats great, Bruce! 1Big strong Freshwater Smallies, good going! Didn't get on them today.…"
21 hours ago
Bruce Tomaselli commented on John Sheehan's photo
Thumbnail

Clinton Reservoir Smallie 2

"I've landed 2 over 20" in the past several years. One just made 20" and the other a…"
yesterday
John Sheehan commented on John Sheehan's photo
Thumbnail

Clinton Reservoir Smallie 2

"Thanks Bruce, we got them 12-15".Going here again today to fish deeper and explore the…"
yesterday
Bruce Tomaselli commented on John Sheehan's photo
Thumbnail

Clinton Reservoir Smallie 2

"Great smallmouth."
yesterday
John Sheehan commented on Jeffrey D. Abney's photo
Sunday
John Sheehan commented on John Sheehan's album
Thumbnail

Watershed Fishing 2025

"Thanks Dick, hoping for bigger Smallmouths after we get used to this 425 acre body of water, with a…"
Sunday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Love This Netted Coppernose……Best of 2025

"Thanks Dick…..my favorite picture of 2025…..loved the markings"
Saturday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

More From Great Fishing on 5/18 & 5/19…….

"We are very fortunate to have an abundant supply of fliers Dick…..I’ve made a lot of…"
Saturday
dick tabbert commented on John Sheehan's album
Thumbnail

Watershed Fishing 2025

"Lookin good John,."
Saturday
dick tabbert commented on Jeffrey D. Abney's photo
Thumbnail

More From Great Fishing on 5/18 & 5/19…….

"That guys on my bucket list."
Saturday
dick tabbert commented on Jeffrey D. Abney's photo
Thumbnail

Love This Netted Coppernose……Best of 2025

"Nice coppers as always Jeff."
Saturday
dick tabbert commented on Jim Gronaw's photo
Saturday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Lots of Predators in May…..5/22/2025

"Thanks Slip…..hope you’re doing well!"
Saturday
Slip Sinker commented on Jeffrey D. Abney's photo
Saturday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Lots of Predators in May…..5/22/2025

"Thanks Bruce….Have a great Memorial Day weekend…."
Friday
Bruce Tomaselli commented on Jeffrey D. Abney's photo
Friday
Jeffrey D. Abney posted a photo

Lots of Predators in May…..5/22/2025

A lot of largemouth are guarding Frye…..when you cross through the pod with your bait it may be…
Thursday
Jeffrey D. Abney posted photos
May 21
Jeffrey D. Abney posted photos
May 21
Jeffrey D. Abney posted photos
May 21

© 2025   Created by Bluegill.   Powered by

Badges  |  Report an Issue  |  Terms of Service