Bluegill - Big Bluegill

Do you love big bluegill?

Views: 540

Replies to This Discussion

This rotisserie motor is what I use to power my dryer.  I keep my poppers rotating until the finish dries/sets up other wise it will sag.   The pour-on in the picture has a real long pot time but takes a long time to set up, I will let it turn four to six hours and then let it dry overnight. It drys very clear and I haven't had any issues with tackiness after 24 hours.  As you can see it was very simple to construct the dryer. I cut 3 circles from scrap wood, the diameter was the same as a 12 ounce coke can, then drilled a hole in the middle of the circle then glued it to a dowell.  the foam came from an old coozie (canned drink insulator sleeve) and was slipped on and is easy to replace when it starts getting worn.  Commercial dryers turn a little faster than 1 RPM but this seems to do the  trick.

Great stuff mark thanks for sharing.

I have a rotsserie motor I use for various things, rods and occasionally bug, but it turns about 6 rpm's .  I have known of guys using the motor from microwave turntable for similar purposes, which I think are a little quieter than what I have experienced with rotisserie motors.  That looks like a very well designed and versatile setup you have there.

I used a microwave oven plate turner motor out of an old broke oven. It works just fine but I just have one disk attached for holding the poppers.

What a great idea, we have some great minds here.

here's my paint area. my dryer is in the back left.

sorry about the picture its the wrong one. I don't think it loaded anyway.

I guess the picture answered my question. Is that finish a polyurethane. Ive been using epoxys and haven't really found one that does what I want.

the finish pictured above is a 2-part epoxy "envirotex lite"

I have a friend that likes "BSI" two part epoxy that has a 30 minute cure time I think I will give that a try because some times I get tired of waiting for the "envirotex lite" to cure.  

Also popular for finish is a glue called "Liquid Fusion" with the added advantage of  no mixing required.

When I am playing around with a new design I will use uv light cured finish that dries almost instantly; but not practical if  you are doing 40 poppers at a time.

i think a product called liquid fusion is a good epoxy alternative.i think it also must be dried on a wheel

clever design John; very appealing to the eye!! bet you had no problem selling them!!  I sold my turner with a rod wrapper i built on craigslist last Saturday replaced it with a CRB rod turner that easily adapted to a fly dryer.  If I came across some motors like yours with those clean lines I would make a permanent turner dedicated only to fly tying.

RSS

Latest Activity

John Sheehan commented on John Sheehan's status
"We are exploring/learning the three permit lakes late in life. Today was Canistear Reservoir. Hot…"
22 hours ago
John Sheehan posted a status
"Just dink smallmouths and Largemouth Bass for Greg and I, fishing a third Reservoir this year."
22 hours ago
John Sheehan posted photos
yesterday
Bruce Tomaselli commented on Jeffrey D. Abney's photo
Thumbnail

Sunrise Shellcracker…..7/23/2025

"I love your kind of fishing!"
Sunday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Sunrise Shellcracker…..7/23/2025

"I’m very fortunate that the fishing  in coastal North Carolina is so great and most…"
Sunday
Jeffrey D. Abney commented on John Sheehan's photo
Thumbnail

JULYWP

"Summer colors on this white perch!"
Sunday
Jeffrey D. Abney commented on John Sheehan's photo
Thumbnail

JULYP

"Nice Yellow John….good colors"
Sunday
Jeffrey D. Abney replied to Jeffrey D. Abney's discussion Panfish Species of North America- Which Ones Have You Caught?
"Often bass fisherman will catch Warmouth on 9” worms……..they. don’t fight…"
Sunday
Jeffrey D. Abney replied to Jeffrey D. Abney's discussion Panfish Species of North America- Which Ones Have You Caught?
"This is a great comparison John…..I added another photo to give perspective….."
Sunday
Bruce Tomaselli commented on Jeffrey D. Abney's photo
Thumbnail

Sunrise Shellcracker…..7/23/2025

"I sure envy you, enjoy!"
Sunday
John Sheehan replied to Jeffrey D. Abney's discussion Panfish Species of North America- Which Ones Have You Caught?
"Hey Jeffrey! Does the Warmouth have about the same sized Mouth as a Black Crappie of equal size, or…"
Saturday
Jeffrey D. Abney posted photos
Jul 23
Jeffrey D. Abney replied to Jeffrey D. Abney's discussion Panfish Species of North America- Which Ones Have You Caught?
"Some quality Warmouth I caught in my early years on the Albemarle….."
Jul 23
Jeffrey D. Abney replied to Jeffrey D. Abney's discussion Panfish Species of North America- Which Ones Have You Caught?
Jul 23
Jeffrey D. Abney replied to Jeffrey D. Abney's discussion Panfish Species of North America- Which Ones Have You Caught?
Jul 23
Jeffrey D. Abney posted photos
Jul 23
Jeffrey D. Abney replied to Jeffrey D. Abney's discussion Panfish Species of North America- Which Ones Have You Caught?
"Thanks for sharing John……you have patterned your available species pretty good over…"
Jul 23
John Sheehan replied to Jeffrey D. Abney's discussion Panfish Species of North America- Which Ones Have You Caught?
"Only caught five of these Species up here in New Jersey. Bluegill, Pumpkinseed, Red Breasted…"
Jul 23
Jeffrey D. Abney posted a photo

Crackers Saved This Morning Behind A Cold Front…..7/23/2025

If I get out the remainder of July it will probably be a crappie stalk on the coastal marsh……
Jul 23
Jeffrey D. Abney posted photos
Jul 23

© 2025   Created by Bluegill.   Powered by

Badges  |  Report an Issue  |  Terms of Service