The New Yakkanoe Gets Fish

[David, aka, "McScruff"]

I got the Mad River 14 to the lake today. Its big water and the large bluegill eluded me. Lots of small ones would hit anything that landed near them, topwater or subsurface. There was active feeding, everywhere, but the only bigger ones I could drum up were over cut banks and fallen trees. Even they ere small and I got those on spinners.

The topwater fly that got all the attention was a black/yellow Chernobyl Ant on #8-10 hooks. Truth is, they were smacking anything on topwater - the fish had a lot of gusto. But they were just too small to do anything but knock these floaters around!

The subsurface fly to use was a Briminator, although it wasnt much of a performer.

Little Guy on white Beetle Spin

Another little guy on white Beetle Spin

So, I didnt beat any records. But, its always good to get outdoors for the fishing thing. Not being in a canoe for years, however, I learned and re-learned many things. Here's a brief summary (well, brief for ME):

The Adv-14 is BIG - coming from a small kayak, this is immediately felt. Lots of places to put things. However, you cant reach your things if they are at the end furthest from you. No wandering around this thing to dig into gear bags. Its hull design makes it stable for a canoe, but don't push it. Plan gear placement wisely.

Roomy - Not at all like a kayak which I find cramped. The elbow room is nice, even if you aren't dancing a jig here.

Tough to enter and exit - Okay, I'm fatter and older than I used to be. In other words, agility isn't what it once was. I'll loosen up as I use it, and I've started a little "canoe exercise routine" to help.

Hard on unused muscles - This goes hand in hand with the agility thing. This canoe is a hybrid, with a poly, rotomolded hull. This means its heavy - 73 lbs. Getting it on and off the truck is easy enough, but the whole thing is a lug for one person.

It does paddle easy enough and moves well underway. Not really lithe, it does scoot once you get her moving and it isnt sailed like a leaf in the wind.

Wheeled dolly - this is going to be an absolute necessity to get to the water. I backed to a boat ramp today, and I was the only one there. But on busy fishing days, that aint gonna fly. And at the rough-and- rustic places I like to visit, those without ramps and other niceties.... well I aint lugging this thing down the slope. Gotta get it on wheels.

Nice to reach way out to different spots - I paddled several miles, just getting the feel of the Adv-14 and casting flies. At one point I went across the bay to the far shore, on a whim. The JOY OF MOBILITY! Pick a spot and go. Get there and fish the shallow or deep sides of cover with ease.

Anchoring system - gonna want one in time. Im not feeling pinched for it, yet - but I will.

Bring worms - I love fly fishing, and casting spinners and spoons, but worms are my back up. I always tote a telepole, floats and the basic rigging for those times when a worm is the thing.

Today, I left the ding-dang things at home. Wont do that again.

Thumbs UP to canoe paddles - they were developed over thousands of years for a reason. Kayak paddles are out. Im sure some enterprising Injun tried a double ended paddle in the dim past ... ending up throwing it on the fire. One of the wettest rides youll ever have is using a kayak paddle to propel a canoe. Water runs right down the thing on every stroke, into your arm pits and swamps the interior. Kayak paddles - 0 Canoe Paddle - 1

Hip waders are the ticket - I'm a wimp when it comes to wet feet. I hate it. With canoes, your feet will get wet sooner or later. Just getting in and out will do it, if you don't have a means to prevent it. Scampering over logs and rocks to avoid the water is sometimes possible, but cannot be relied on, Some shorelines just dont afford that.

Hip waters will let you just step in and out, without trying to balance on dodge around in an effort to keep your feet dry - much easier for a fat, old guy. Plus hip waders just look very COOL. A man in hp waders MEANS BUSINESS. Second choice will be knee high rubber boots.

[Slip Sinker]

great summary of what sounds like a successful as well as memorable day!

anchor and trolley system is a great addition. to position yourself with the wind while fishing awesome.

got over a weeks worth of good weather coming up here in michigan should be able to get mine out at least one more time before snow falls.

[David, aka, "McScruff"]

Cool planning on tomorrow, as weather is supposed to be good.
Fingers crossed.

[David, aka, "McScruff"]

I've found some good ideas for anchor systems that run internally.
You don't want to anchor a canoe except at the direct ends; doing it to either side increases the chance of swamping. I'm calling it a winter project.

[Slip Sinker]

heres the system i ordered... worked out pretty nice... easy to install... really like the idea of rivots

http://www.amazon.com/Yak-Gear-Deluxe-Anchor-Trolley/dp/B0097N2HNY/...

[David, aka, "McScruff"]

It does have the benefit of being mainstream - more accepted if resale is in the future.
I may go with it, since it's what everyone uses. I don't like stuff on the outside of the hull, but us an option.
The one I was considering takes the anchor fairleads out the prow and stern, with all lines run internal.
This would be an easier install.

[Slip Sinker]

would be a cleaner install,,, mine is a sit on top this was the only option... looks pretty good with all accessories mounted though.

[Slip Sinker]

whats your plan for a fish finder

[David, aka, "McScruff"]

My plan? Yes.

Seriously, I expect to spend $200-$300 for one. That'll be next Spring.
I'll mount the transducer through hull, since the seats have ample and secure space beneath them.

[Brian Jones]

David It sounds like your a man on a mission and have a plan of attack.  I would look for a FF that is easily removed and can be transferred from one boat to another if you plan to get a smaller craft later.  My 535 is a PITA to change out, I so wish I bought an extra mount and transducer.

 

I believe with that console idea you sent me, I can make a console that will move between my two smallest yaks. Just have to consider how to mount the TX as a shoot thru and still be able to move it from boat to boat. Wonder if it will shoot thru buttyl tape....guess I have an experiment for sunday.

[Slip Sinker]

i have a Humminbird Piranhamax 170 i was going to garage sale your welcome too. use it until you shop for a new one. if you want pm your address

[David, aka, "McScruff"]

I won't expect the TDR to get a good signal with tape.
It needs to be "one with the hull" without anomalies between it and the hull itself.
This is why it's always bedded in some kind of goop. This eliminates anomaly and unifies the TDR to hull to water connection.
PS no bubbles in the goop allowed.
What does a replacement TDR cost?

[Keith Ritter]

My Dad had a small tray that he placed his transducer in then filled water. It worked perfectly through the bottom of his aluminum boat. This was a flasher though.