Bluegill - Big Bluegill

Do you love big bluegill?

 I buy most of my tying materials online.Quite a few times when I get a new spool of thread there is no visable end showing to start using the spool. I have found this to be frustrating to say the least. Has anyone else had these issues, and how do you start a new spool with no loose end? I generally take a hook and pull some thread out, then start it from there which results in the thread running over it's self and finally binding up up much like a backlash on a bait casting reel.  Any ideas on a a better way to start a new spool?

Views: 208

Replies to This Discussion

I put on the magnifiers and use my bodkin till I find the end. My biggest thing and I still do it quit often is constantly breaking my thread.

 I do the same thing. Put on the magnifier and slide a needle around the edge of the spool. Usually I can catch the end of the thread.

But...... After 2 minutes of this I usually lose my patience and composure and my wife does it for me. 

  I am with you on this one........I usually just give up and start it "somewhere"......And it's not long B4 it 'wads' up and I cut that out and start it again "somewhere". Most of the time......after the 4th or 5th restart, I will chunk it in the trash and use a different color until I buy another spool. I try to buy local as much as I can (don't want them to go away) and when doing that you can LOOK and make sure you can see the end..........//works-for-me//......But alas.....most of the time the local shops don't have the color/shade I am looking for.....so I too roll the dice and buy online...It is for this reason I recently started tying most of my flies with red or black thread, the local boys usually have those colors on hand and the fish just don't seem to mind. Now I fish 99% warm water......trout fishermen may find it more important to "Match-Tha-Hatch"....Don in SC

Had a spool recently that had the same problem no end, usually a magnifier works but this one  I ended up pulling up a thread and cut it to get a start.  ended up cutting a few strands on this one and now its a hopeless mess! If someone comes up with some voodoo that works I'll try it out!

 What kind of thread are yall buying that has these problems? I always buy Uni and the end of the thread is stuck in a slice on the edge of the spool.

Lee, the last spool I had trouble with was Danvilles and theirs also has a slit in the spool for the tag end, but when it arrived there was no end showing. I also use Uni thread and like both brands. This problem doesn't happen often, but it is sure frustrating when it does. Being new at tying flys, I wish I had a fly supply shop near me so I could check out the materials before buying them.  

I have the worst time with Danvilles I break it a lot. I have much better luck with the Uni.

RSS

Latest Activity

John Sheehan commented on John Sheehan's photo
Thumbnail

Spoon Bass

"Thanks Jeff!"
16 hours ago
John Sheehan commented on John Sheehan's photo
Thumbnail

Rattle Trap Bass

"Yes, the front one at least! What do you suppose happened there ,Jeff?"
16 hours ago
Jeffrey D. Abney commented on John Sheehan's photo
Thumbnail

Rattle Trap Bass

"Another good bass…..his dorsal fin is almost gone completely….."
17 hours ago
Jeffrey D. Abney commented on John Sheehan's photo
Thumbnail

25"+Spoon Pick

"Big chain, very nice!"
17 hours ago
Jeffrey D. Abney commented on John Sheehan's photo
Thumbnail

Spoon Bass

"Nice bass John!"
17 hours ago
Jeffrey D. Abney commented on John Sheehan's photo
17 hours ago
John Sheehan added a discussion to the group Lure History
Thumbnail

Discontinued Lures

Some of my favorites I can't find anymore: Acme Fash King Flutter Spoon, Eppinger Flutter Chuck,…See More
yesterday
John Sheehan posted photos
yesterday
John Sheehan commented on John Sheehan's photo
Thumbnail

25"+Spoon Pick

"25+inch Pickerel was best of the 13 Fish caught today a day after the Worm Moon. Two Bass and the…"
Tuesday
John Sheehan commented on dick tabbert's photo
Thumbnail

IMG_0186

"1/16th oz., good!"
Tuesday
dick tabbert commented on dick tabbert's photo
Thumbnail

IMG_0186

"These are my last build. I added more colors."
Tuesday
dick tabbert commented on dick tabbert's photo
Thumbnail

IMG_0186

"No Jon I went with the 1/16 oz jig heads so I could have a larger hook for crappies. It's a #4…"
Tuesday
John Sheehan commented on dick tabbert's photo
Thumbnail

IMG_0186

"Colors are great !"
Monday
John Sheehan commented on dick tabbert's photo
Thumbnail

IMG_0186

"Thats a good Crappie size! Are they 32nd Oz Jigs?"
Monday
dick tabbert commented on dick tabbert's photo
Thumbnail

IMG_0186

"They are right at 2" long."
Monday
John Sheehan commented on dick tabbert's photo
Thumbnail

IMG_0186

"I Can see Crappie and Bass chomping on them, Dick!"
Sunday
dick tabbert commented on dick tabbert's photo
Thumbnail

IMG_0186

"I made these up for crappie in mind. They might be a little big for gills unless it a bigger gill."
Sunday
John Sheehan commented on dick tabbert's photo
Thumbnail

IMG_0186

"What Species you got in mind for these great Minnow ties , Dick?"
Sunday
dick tabbert posted photos
Sunday
John Sheehan commented on Sam k.'s group Trout Bums
""Trout Season opens April 6th 2024 in New Jersey. Waters are runnin' high for…"
Sunday

© 2024   Created by Bluegill.   Powered by

Badges  |  Report an Issue  |  Terms of Service