Bluegill - Big Bluegill

Do you love big bluegill?

Has anyone made an electric drum scaler? Any pictures that you would be willing to share? I found one on Utube, but there wasn't much info given except that it spun 60 times per minute.

Views: 1201

Reply to This

Replies to This Discussion

Suggestion though, those drum scaler tends to overly tenderize the meat. I rather do fillet method to preserve the firmness of the meat, after bleeding and chilling them before filleting.

At the risk of displaying my considerable ignorance, How does one bleed a bluegill?

There's no such thing is ignorance. Just misinformed, or lack of knowledge. If you want instant bleed out, go for the heart. One quick perpendicular cut (across the breast) just before the pectoral fins. You'll find that heart as the blood pours out (PG-13 version). Once the bleed out completely, which is within 15 minutes or so, cool the fish off in icy water to firm up the meat, retaining that firmness.

John, you got me thinking for the past few days, and now, I have to pull out fishing priest that I retired so long ago, after seeing the scaling drum and passive thinking about meat bruising, which dawned on me about the fishes thrashing around in a 5-gal bucket filled with aerated water before I could transfer them into the icy cooler.

Resuggestion:

1. Get yourself a club/priest, either homemade from hard wood (varnish many times over and smooth out to prevent any pore from absorbing the fishy scent), or a stainless steel rod with a bulky head to knock some senselessness into the fish.

2. After catching the fish, a quick blunt force to the noggin, just above the eye, will send the fish into a subdued state. I stopped doing this because my family said I was too mean to hurt the fishes after catching them. This is why I string them for the past 12 years.

3. Insert the knife through the gill, and cut the gillplates on either side. While the fish is unconscious, the heart is still pumping. Gillplates cutting will allow the heart to pump the large volume of blood out out of the body, before the heart doesn't have enough blood left to pump out. This will take about 2 minutes. This minimize the gamey taste of any fish, aside from the mud veins. The reason why I stop this practice because my family said it's too cruel to see a bleeding fish, and the blood create too much staining at the capture site, which other anglers were not too thrill about.

However, after years of enjoying my method of direct heart bleeding method which takes a bit longer, I'm going back to the noggin-gillplates cutting method for more subdued killing method, and immediately icing them. Now, looking for that homemade priest..good grief. I may have to invest in a few miniature bats instead.

Leo, Post a picture of a priest of your liking. I do wood turning and would love to make one for each of us.

John

John, that's very generous of you. I had an old one looks something like this, that was about 9" long, and about 1.5" in diameter. My friend, a tinkerer and a hobbyist, turned omy broken oak bed frame into quite a few different priest's length. I chose the 9" because it was convenient and compact to carry around with me. I have a few 6" to 10" stainless steel extensions for the ratchet socket wrench that I'm thinking of turning one of them into a blunt instrument of la-la land.

If you're a tinkerer, and a woodsmith, it would be great to buy a few from you if you make them. Your design style of course. Nothing like a personality being imbued into the piece of art.

Attachments:

Thanks, It is on the to do list.

 

Ah, I know those as shark bats, but I guess this is the mini-version :) I learned the term not from a fisherman, but from a friend of mine who was a Sheriff's reservist when we were young...

Here is mine that is 20+ years old. Started rusting so it looks bad but works like a charm. Will scale about 40 at a time in 7 minutes. Not a scale left on them & does not damage skin or meat. (I guess it would if you left them too long). I would like to know how many thousands this thing has scaled over the years. I believe it is 22 RPMs per minute. Anything faster or slower does not scale properly. Had a buddy build one like this & he had to adjust his RPMs to match this one to get it to scale correctly. Sprays water through the center of the drum while turning which washes most of the scales out the holes. Each hole was individually punched with hammer & punch. The jagged edges inside scale the fish as they pass by it. Motor has a gear reduction box attached to it.

Attachments:

More scaler photos.

Attachments:

Thanks for the pictures. I knew there had to be some out there. What is the length and diameter of the drum?

Which state is this scaler located?

Reggie

Circumference is 50 inches. Length is 24 inches. Located in central GA.

RSS

Latest Activity

John Sheehan commented on Mikey-D's photo
Thumbnail

IMG_20240216_090644224

"Yea Man !Wind can be a bane when trying to land Fish. Many good ones get knocked off at the end of…"
9 hours ago
Mikey-D commented on Mikey-D's photo
Thumbnail

IMG_20240216_090644224

"Thanks fellas it was tough fishing a little windy here to lost something big at the boat pulled the…"
yesterday
Jeffrey D. Abney commented on Mikey-D's photo
Thumbnail

IMG_20240216_090644224

"Looks like a nice sow!"
Monday
Jeffrey D. Abney commented on Mikey-D's photo
Thumbnail

IMG_20240216_090644224

"Very nice fish Mike…..wanted to try this morning but woke up to 25 mph gusts from the north,…"
Monday
John Sheehan replied to John Sheehan's discussion Record Kansas Crappie
"I wonder if Fish every ingest Ball bearings found in the water . From the first story I posted the…"
Sunday
tracy willis commented on Mikey-D's photo
Thumbnail

IMG_20240216_090644224

"very nice fish."
Sunday
tracy willis replied to John Sheehan's discussion Record Kansas Crappie
"yeah i was confused by the story when it came out and was trying to figure out how someone could…"
Sunday
John Sheehan commented on Mikey-D's photo
Thumbnail

IMG_20240216_090644224

"Good looking Slabs!"
Saturday
John Sheehan commented on Mikey-D's photo
Thumbnail

IMG_20240216_090644224

"Excellent February 42 degree WT catches! Thataway Mikey -D! Nice to see this. I got the Cabin Fever…"
Saturday
Mikey-D posted photos
Saturday
John Sheehan replied to John Sheehan's discussion Record Kansas Crappie
"Really!Thanks for the response Tracy. It's funny to joke about stuff like that but to actually…"
Saturday
tracy willis replied to John Sheehan's discussion Record Kansas Crappie
"someone turned him in.  it first weighed 3.7 pounds then magically it weighed 4.07 pounds at a…"
Friday
John Sheehan commented on John Sheehan's photo
Thumbnail

17" White Catfish

"Tongue the size of my palm."
Feb 14
John Sheehan posted a discussion

Record Kansas Crappie

Anyone know personal specifics about this?…See More
Feb 9
John Sheehan commented on Troy Dorman's photo
Thumbnail

1000003213

"Sweet ,.Troy!"
Feb 4
John Sheehan commented on John Sheehan's photo
Thumbnail

icepic2

""crazy Weather ". Indeed Jeffrey! We enjoyed the Day although it wasnt productive Fish…"
Feb 4
Troy Dorman posted photos
Feb 3
Jeffrey D. Abney commented on John Sheehan's photo
Thumbnail

icepic2

"Glad you guys got an ice fishing trip in the books John….crazy weather this winter…."
Feb 3
Jeffrey D. Abney commented on Troy Dorman's photo
Thumbnail

1000003208

"Nice crappie Troy…….hope you have a great fishing year!"
Feb 3
John Sheehan commented on Troy Dorman's photo
Thumbnail

1000003208

"Nice a Crappie from shore!"
Feb 3

© 2024   Created by Bluegill.   Powered by

Badges  |  Report an Issue  |  Terms of Service