Bluegill - Big Bluegill

Do you love big bluegill?

Do any of you cast small jigs?
1/64 and 1/32 with no float.. I really like casting jigs and fishing with no float. And slowly working them back. I make my own hair jigs and they fall so nice and slowly. I just lift n let them fall again.

Just wish I could get more distance. Without having to use a really long rod.

What should I be expecting casting distance wise? I'm using a daiwa presso 6.5ft rod and 4lb mono line. I would like to use some 2lb line but I just don't know if I can bring myself to do it.

The rod is new one to me and I really like it so far. Thanks

Views: 8176

Reply to This

Replies to This Discussion

You will increase your distance if you switch to 2lb.

The Japanese make some amazing rods to cast UL jigs. Mebaru or Aji style rods are super light and made for jig fishing. Hard to find on the American market.

LOLOLOL;;  SMOLTZ;;  BESIDES MASTER LEDHEAD;; MAKING HIS OWN JIGS ; AND CASTING THEM;; ALSO;; THERE IS;; MARK STEIN;; ALLEN MORGAN;;  DICK TABBERT;; JIM COSGROVE;; AND SO MANY OTHERS !!   WITH LEDHEAD;; BEING A MASTER AT THE  ( MICRO ) JIGS !!!!

Okay,
Well hopefully those guys will chime in and answer my question.

Yes with 2 and 4 # test respectively. They catch lots of fish for me .Red Breasted Sunfish ,Blue Gills , Pumpkinseeds, White Perch and Yellow Perch and Crappie in particular .I am not fishing ultra clear water and feel i can cast far enough for the waters i'm fishing.

I've specialized in fishing 1/28 oz, 1/32, and even 1/64 oz homemade jigs (surefirejigs.com) for years now, as has my son and grandson. Of course, bluegill, crappies, trout, and bass love this approach! We all use 4 1/2 to 5' light rods and very thin Tectan mono in 4.4 and 5.5 # tests. Casting length is always quite satisfactory, tho obviously not horizon reaching!Due to commercial push toward long, extremely expensive, graphite rods, most of today's "experts" will disagree with our proven gear. But take a light jig and ,say, a 4 1/2 ' UL Ugly Stik and "punch it out",you'll reach plenty of water to work back a jig! By the way, I took my lead on this from the late,great Charlie Brewer, of slider fishing fame, who finally settled, after much on-the-water testing, on 4'9" light ,but firm, rods for fishing very light, cut down Slider jigs.

Hey John Mc Kean-. I ve been tying squirrel tail on my old Charlie Brewer slider jigs and catching Perch and Crappie .Do they still make those flat sided Slider Jigs ? Would like to get some more .They are a great design for cold water .

Hi John, Yes, The last I checked, the Charlie Brewer Slider company still offers ALL their slider head jigs (their 4'9" rods,too !). I'm like you - I used to tie material onto those slider heads, tho I used to employ the lighter "Crappie slider heads" for these small bucktail jigs. Funny story -Charlie himself loved the gliding action of light jigs and wanted to get others into this great light sport, so would convince friends & customers to cut the heads down to much lighter weights. Many were surprised with jig heads down less than 1/32 oz,they could still whip them out ,almost to their regular distances with short rods (at the time Charlie sold a 4'3" fiberglass beauty that was a joy to fish with! Wished I hadn't given mine away!!)

Thanks John ! Wish they made a 32nd oz. Original flat slider head jig .With maybe an 8 or 6 hook .Usually I resort to ball heads but the flat bottom slider  jigs I've done very well with .

I knew Charlie Sr. some 40 plus years ago. I stopped by his home in Lawrenceburg, TN on a Sunday afternoon, just like today. My oldest  son was still in diapers, so I can do the  math on how long ago it has been easily. We visited for a while then Charlie took me to "Elmer Brown's Rod Shop" and I almost positive on the shop's name. I purchased my first custom, glass slider rod. I used it for years. Back then I learned to build & tie my own rods too. I always made my spinning rods with the cork "Tennessee Handles". If I had the choice, I'd have those handles on all my spinning tackle today. The old school plain flat slider head is one that belongs in every ones tackle box. They are deadly little jigs. Also, the 1" crappie slider is a hard bait to beat for the GILLS.

in my experimentation there is a sweetspot in rod length between 5 and 5-6' that going longer actually hurts the cause.

I will have to try some of my shorter rods then.

I been tying for years n love my little hair jigs. Basically mini bucktail but with kiptail.

I just not sure I'm getting the distance I have read about guys on here casting jigs alone. Sure with a float you can
Cast a float n jig a heck of a ways.
What distance are you guys getting with 1/64 or 1/32 with no bait?

I/m not sure of the actual footage on my casts, tho when fishing alongside guys that are trout fishing with heavier spinners& spoons, I can almost acheive their distances with a 1/28 oz wool/pine squirrel tail jig (Banshee). Certainly, even with 1/64 oz bluegill jigs I can whip it far enough to allow a good sized "lane" to work it back. The key is to "muscle" the cast - back as a youth, we had spirited "apple battles" between us neighbor kids, where we'd affix an apple form trees on our yard onto a 3' willow stick and fling em between our properties. Amazing distances & impacts ( Believe me, I KNOW!). The casting motion with a short,especially fiberglass rod, with light jigs is the same principle. Mind you, this is not "artful" casting , as the guys with $800 graphite long rods will CLAIM, but it adds some ZEST, as well as results to your fishing!!

RSS

Latest Activity

John Sheehan commented on John Sheehan's photo
6 hours ago
John Sheehan commented on John Sheehan's photo
Thumbnail

491348751_10238683890455984_2672104245638727985_n

"Yes and very aggressive that Day!"
7 hours ago
John Sheehan commented on John Sheehan's photo
7 hours ago
John Sheehan replied to Bruce Tomaselli's discussion Unable to Log in
"No idea ,Bruce . It doesn't happen from my end! Hope it gets straightened out for you ."
7 hours ago
Bruce Tomaselli posted a discussion

Unable to Log in

It's curious. I can go for 3 to 5 days straight without being able to log in here. It happens quite…See More
7 hours ago
Jeffrey D. Abney commented on John Sheehan's photo
Thumbnail

Ringwood Brook Rainbow Trout

"Smoker time…..enjoy John!"
22 hours ago
Jeffrey D. Abney commented on John Sheehan's photo
22 hours ago
Jeffrey D. Abney commented on John Sheehan's photo
Thumbnail

489926224_10238683871295505_5852549182092207622_n

"Seeds always come to the party if they are in the area.,,,"
22 hours ago
Jeffrey D. Abney commented on John Sheehan's photo
Thumbnail

492222666_10238698533862060_5336729201480880262_n

"Nice gill John…..on the little rap……..my dad loved putting that bait on a fly…"
22 hours ago
John Sheehan posted photos
yesterday
John Sheehan commented on John Sheehan's status
"Somewhat surprised because it seemed like a quick turn on."
Thursday
Jeffrey D. Abney commented on John Sheehan's status
"Good deal John…..were you confident or somewhat surprised by today’s success from…"
Wednesday
John Sheehan posted a status
"Some decent Gills and Crappie today from shore. Wish I got a Water temp. They were active between 11-noon!"
Wednesday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

In the Net….4/20/2025

"Look how little my popeye jig looks by the tail.......catch so many bass every year on these small…"
Monday
John Sheehan commented on John Sheehan's photo
Thumbnail

491836771_10238604253985122_2836813665102144302_n

"Mid-May is a guess without checking my records, Jeff. "
Sunday
John Sheehan commented on John Sheehan's photo
Thumbnail

wacky Bass on the Flats

"Thanks Dick, this lake is not producing like it has for Greg and I like it has in the past. We hope…"
Sunday
Jeffrey D. Abney posted a photo

Pretty Colors to the East Minutes Before Sunrise…..4/20/2025

Beautiful sights fishing so close to the ocean…..
Apr 20
Jeffrey D. Abney posted photos
Apr 20
Jeffrey D. Abney posted photos
Apr 20
Jeffrey D. Abney posted a status
"Finally had winds below 20 knots this am so I splashed for three hours ….found 66 degree surface temps…..20 bites, caught 19 bass on jigs"
Apr 20

© 2025   Created by Bluegill.   Powered by

Badges  |  Report an Issue  |  Terms of Service