Bluegill - Big Bluegill

Do you love big bluegill?

I got my float tube out of storage today after a long hiatus today (since last year) and inflated it. To my dismay, one of the two bladders will go from solid to feels-like-a-down-pillow in 30 minutes.


I haven't yet taken it out of the cover to look for the leak, and before I invest any time into that (and into finding my patch kit; it might be at my desk at work for some reason :p) I wanted to get the opinions of seasoned tubers here as to whether I should bother trying to find the leak and patch it (tube is 3 years old) or just assume that at this age it will leak again soon and just:

A) Order a new bladder


-or-

B) Replace it with a low-cost pontoon boat, which has the advantage of being able to put my trolling motor on the rear deck. I think I know what Leo will say to that one already :-)

Thanks!

Jonathan

Views: 1402

Replies to This Discussion

It would help considerably to know what brand the tube is.  If it is an outcast Fish Cat 4 or Fat cat model it couldn't be more than barely broke in. I gave away a couple Fish Cat"4s a couple years ago that were 7 yrs old and used heavily the first couple years. Patch kit and-or Aquaseal should have you good to go quickly.  Wish you the best. 

I found problem. The tube is a Creek Company ODC 420L, and the problem is with the valve. Unfortunately, it's not on the replaceable-for-cheap screw in Boston valve, but the base that it screws into, which is part of the bladder. There is a hard, raised ring on that base, and a soft gasket in the screw-in Boston valve forms a seal against it. That raised ring has two indentations in it, on the outboard side, about and inch apart.

I can't imagine how they got there, it could be a manufacturing defect that never manifested this much before. I remember that the left bladder would very slowly lose a little air over a day's fishing, but nothing like this in the past. I've had the tube for maybe three years, haven't used it more than a half dozen times. I've found that if I get the tightness just so, it doesn't leak much, but if lateral stress is put on the valve, it will leak a lot.

I'm going to try using either something like JB Weld or a silicone sealer to build up those indentations. Probably JB Weld, because this in a hard plastic ridge. The only other option is to replace the bladder. At $60 for a new bladder or $200 for the cheapest Creek Company pontoon boat, I'll have to think that over if the repair doesn't work. OTOH, pontoon boats are heavy and hard to carry to walk-in places.

I have had good results from calling companies and explaining the issue.  They may have had a run of bad valves and are waiting for you to call, but it is probably a one in a thousand.  My most recent success came from writing the CEO of a company and I got what I wanted, which was for them to honor a lifetime warranty.  Creek Company also has a liability issue, a customer being endangered by a manufacturing defect.  Just be sure to carry and wear a pfd, it could save your life.

Heed the advise of Jesse Denton, Contact the company . Explain first how much you enjoy the product , and how shocked you were to find a manufacturing defect.

 Explaine that where you would normally return the entire tube for replacement , a replacement bladder would save Creek Co. fund overall  ,and keep a customer happy.

The Outcast tubes have a 5 year guarentee, and I would imagine Creek Co. would be similar.

RSS

Latest Activity

Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Pleasant Surprise Today….5/29/2025

"Thanks a lot Bruce….wishing you a speedy recovery and good luck when you get out…"
7 hours ago
Bruce Tomaselli commented on Jeffrey D. Abney's photo
Thumbnail

Pleasant Surprise Today….5/29/2025

"Great crappie. I'm hoping to hook up with a few. I'm on the mend and expect to be able to…"
16 hours ago
Jeffrey D. Abney posted photos
yesterday
Jeffrey D. Abney posted photos
yesterday
Jeffrey D. Abney posted a photo

My Biggest Bass Today Was Three Pound Class…..5/29/2025

Plenty bass this morning…….I caught nine guarding Frye…
yesterday
Jeffrey D. Abney posted photos
yesterday
Jeffrey D. Abney posted photos
yesterday
Jeffrey D. Abney posted a status
"We have been entrenched in a stalled frontal boundary all week….finally got a window this morning…mixed six species for a nice bounty.."
yesterday
Jeffrey D. Abney commented on Troy Dorman's photo
Thumbnail

1000004031

"Nice mix ……great tablefare Troy"
yesterday
Bruce Tomaselli commented on Troy Dorman's photo
Thumbnail

1000004031

"Nice batch of fish!"
yesterday
Troy Dorman posted a photo
Thursday
John Sheehan commented on John Sheehan's photo
Thumbnail

Clinton Reservoir Smallie 2

"Thats great, Bruce! 1Big strong Freshwater Smallies, good going! Didn't get on them today.…"
Tuesday
Bruce Tomaselli commented on John Sheehan's photo
Thumbnail

Clinton Reservoir Smallie 2

"I've landed 2 over 20" in the past several years. One just made 20" and the other a…"
Tuesday
John Sheehan commented on John Sheehan's photo
Thumbnail

Clinton Reservoir Smallie 2

"Thanks Bruce, we got them 12-15".Going here again today to fish deeper and explore the…"
Tuesday
Bruce Tomaselli commented on John Sheehan's photo
Thumbnail

Clinton Reservoir Smallie 2

"Great smallmouth."
Monday
John Sheehan commented on Jeffrey D. Abney's photo
Sunday
John Sheehan commented on John Sheehan's album
Thumbnail

Watershed Fishing 2025

"Thanks Dick, hoping for bigger Smallmouths after we get used to this 425 acre body of water, with a…"
Sunday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Love This Netted Coppernose……Best of 2025

"Thanks Dick…..my favorite picture of 2025…..loved the markings"
May 24
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

More From Great Fishing on 5/18 & 5/19…….

"We are very fortunate to have an abundant supply of fliers Dick…..I’ve made a lot of…"
May 24
dick tabbert commented on John Sheehan's album
Thumbnail

Watershed Fishing 2025

"Lookin good John,."
May 24

© 2025   Created by Bluegill.   Powered by

Badges  |  Report an Issue  |  Terms of Service