Bluegill - Big Bluegill

Do you love big bluegill?

What vise do you use and why?

Views: 199

Replies to This Discussion

I use 2 variations of the Super A vise.
Why? It's cheap and holds the hook. \
I'm always looking for a good vise at a good price.
suggestions welcome.
i have one that came with my fly tyin kit. but i have upgraded to the danvise. i wont be abll to use till after my b-day. i got the danvise of of eveilbay for 75.00 shiped to the door,
Peak,it holds,i tye tight flies,them gills and chinks are hard on em.



gators eat my fish
http://www.togenenterprises.com/catalog/item/4130012/7557925.htm
This is a tough and heavy vice holds size 22 to 1/0 tight. Had it for years.
I have to agree with Mike F: the DanVise is the best bang-for-the-buck. I bought one back in '08 (I think), and, although I KNOW there are better vises, I don't feel the need to get one. I've tied as small as #14 (about as small as I can see w/o the magnifier) and as large as 1/0 (largest I expect to ever need), and the DanVise handles them all. For the price, I have yet to find another (new) vise to compare.
I've tied on a Dyna-king for 30 years, it will hold any size of hook, it has been a good work horse vise for me, I tie upwards of 5000+ flies a year, and have for 20 years or more, so for what it is worth :)
I have an older model Regent vise (similar to the one Greg shows) and have had it for about 15 years. I have never had a problem with it. I haven't ever used a rotary type vise, so I don't really know if I am missing anything. Of course I had a tube TV with no cable until everything went digital. Did you know there are channels with no commercials now? Whodathunkit?

I think the key points for a good vise are:
1. Securly holds whatever hook sizes the user will EVER possibly use.
2. Has easy to operate thumb screws, levers or whatever so that getting hooks in and flies out is easy.
3. Has some sort of rock solid base; either a table edge clamp or pedistal (I have both) that doesn't slip up or down, or flop off in your lap when you exert a little down pressure (or a lot for that matter).
4. Has enough up and down adjustment so the user can raise or lower the jaws to a comfortable working height; and it stays there.
5. Fits within the budgetary constraints of the user (this is a little subjective; I know). More expensive vises are not always better, as said by other folks here.

All that being said, my first tying vise was a pair of small vise-grips welded to a piece of re-bar and stuck into a hole that was drilled in a chunk of 4X4. My Dad helped me make it when I was a kid 35 years ago. I still have it. It still works.

Times change I guess. Maybe I should look into the rotary vises to go along with my new flat screen TV and cable. Next thing you know they will come up with a new fangled material to make flyrods out of and then bamboo ones will get really expensive... Naw! Some things are just too ridiculous to believe.

Keith

RSS

Latest Activity

John Sheehan commented on John Sheehan's photo
Thumbnail

Spoon Bass

"Thanks Jeff!"
20 hours ago
John Sheehan commented on John Sheehan's photo
Thumbnail

Rattle Trap Bass

"Yes, the front one at least! What do you suppose happened there ,Jeff?"
20 hours ago
Jeffrey D. Abney commented on John Sheehan's photo
Thumbnail

Rattle Trap Bass

"Another good bass…..his dorsal fin is almost gone completely….."
21 hours ago
Jeffrey D. Abney commented on John Sheehan's photo
Thumbnail

25"+Spoon Pick

"Big chain, very nice!"
21 hours ago
Jeffrey D. Abney commented on John Sheehan's photo
Thumbnail

Spoon Bass

"Nice bass John!"
21 hours ago
Jeffrey D. Abney commented on John Sheehan's photo
21 hours ago
John Sheehan added a discussion to the group Lure History
Thumbnail

Discontinued Lures

Some of my favorites I can't find anymore: Acme Fash King Flutter Spoon, Eppinger Flutter Chuck,…See More
yesterday
John Sheehan posted photos
yesterday
John Sheehan commented on John Sheehan's photo
Thumbnail

25"+Spoon Pick

"25+inch Pickerel was best of the 13 Fish caught today a day after the Worm Moon. Two Bass and the…"
Tuesday
John Sheehan commented on dick tabbert's photo
Thumbnail

IMG_0186

"1/16th oz., good!"
Tuesday
dick tabbert commented on dick tabbert's photo
Thumbnail

IMG_0186

"These are my last build. I added more colors."
Tuesday
dick tabbert commented on dick tabbert's photo
Thumbnail

IMG_0186

"No Jon I went with the 1/16 oz jig heads so I could have a larger hook for crappies. It's a #4…"
Tuesday
John Sheehan commented on dick tabbert's photo
Thumbnail

IMG_0186

"Colors are great !"
Monday
John Sheehan commented on dick tabbert's photo
Thumbnail

IMG_0186

"Thats a good Crappie size! Are they 32nd Oz Jigs?"
Monday
dick tabbert commented on dick tabbert's photo
Thumbnail

IMG_0186

"They are right at 2" long."
Monday
John Sheehan commented on dick tabbert's photo
Thumbnail

IMG_0186

"I Can see Crappie and Bass chomping on them, Dick!"
Sunday
dick tabbert commented on dick tabbert's photo
Thumbnail

IMG_0186

"I made these up for crappie in mind. They might be a little big for gills unless it a bigger gill."
Sunday
John Sheehan commented on dick tabbert's photo
Thumbnail

IMG_0186

"What Species you got in mind for these great Minnow ties , Dick?"
Sunday
dick tabbert posted photos
Sunday
John Sheehan commented on Sam k.'s group Trout Bums
""Trout Season opens April 6th 2024 in New Jersey. Waters are runnin' high for…"
Sunday

© 2024   Created by Bluegill.   Powered by

Badges  |  Report an Issue  |  Terms of Service