Bluegill - Big Bluegill

Do you love big bluegill?

What type of cutters do you guys use to cut out foam bodies for flies? And also, I'm running low on some thread. What is a good recomended thread size?

Views: 351

Reply to This

Replies to This Discussion

For my foam hoppers, I just cut strips of foam from a foam sheet with a hobby knife (plastic model section of a hobby store), and a ruler to act as a straight-edge.  I use a pair of scissors to trim the blunt end when I start the fly.

I haven't tried anything more complex with foam, but I'll probably just use a pair of scissors.

Thread size is really dependent on the size fly you're tying.  I've heard that when you're tying flies, more wraps with a finer thread will result in a stronger fly.  I'm not sure if it's true or not.

For most of my flies, I use either a size 6/0, or a 70-denier size thread.  I've found those to be somewhat similar in size.  I do have some 140-denier thread, that I use when I'm dubbing with a split-thread method.  I've got some 8/0 thread, that I use when I'm going really small, like down to a size 20.

I use a paper cutter when I cut strips and use the scissors from there.

I use a paper cutter to cut strips of craft foam. I also use cylinders of various sizes to cut disks to use for poppers. I glue the disks together with CA glue. ......I use mostly 6/0 uni or 70 denier of other brands. I also use some 8/0 for small flies and 3/0 or 210 for flies with a little deer hair such as a Muddler. When I tie full on hair bugs I will sometimes use GPS instead of the 3/0 or 210.

I bought a paper cutter, you know, the one armed cutter. I bought it at wally world. It was only a few $$, and now all my strips for certain size flies are the same. The cutter works good on 0.5, 1, and 2 mm foam. It starts to roll the 3mm and you don't end up with a square cut. The good thing is that the fish don't seem to mind. Thread, I bought a bunch of Danville 70 denier and am using it up. I think the Uni 6/0 (70) is a better, stronger, more durable thread. I am slowly buying the Uni as I need it. Foam cutters: River Road Creation Cutters makes some really cool cutter. If you fish with hoppers, you can buy a set of cutters in what ever size you want, to make the entire hopper. You get 4 different cutters for the body parts and legs. Very Cool. They also have online instructions. The only problem is the set cost $ 45.00.

Check them out at http://www.riverroadcreations.com

The folks at river road creation make great cutters. I have about 5 cutters for various types of flies, they work great and last a long time.

All I use and ever needed was a self healing cutting board and one of those cutters that looks like a pizza cutter. A razor blade and straight edge work just fine, too.

I cut sheet foam with a large pair of scissors, sometimes not so large.  I cutter cylinders with tubes salvaged from wrecked automatic umbrella shafts and other tubes, most 3/8" or smaller although I have one made from 1/2" EMT.  I use emery boards to shape the bodies for poppers and sliders on a very small wood screw in a battery powered rotary tool.  A chuck with variable sized opening is a real plus.

RSS

Latest Activity

John Sheehan commented on John Sheehan's status
"We are exploring/learning the three permit lakes late in life. Today was Canistear Reservoir. Hot…"
5 hours ago
John Sheehan posted a status
"Just dink smallmouths and Largemouth Bass for Greg and I, fishing a third Reservoir this year."
5 hours ago
John Sheehan posted photos
15 hours ago
Bruce Tomaselli commented on Jeffrey D. Abney's photo
Thumbnail

Sunrise Shellcracker…..7/23/2025

"I love your kind of fishing!"
Sunday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Sunrise Shellcracker…..7/23/2025

"I’m very fortunate that the fishing  in coastal North Carolina is so great and most…"
Sunday
Jeffrey D. Abney commented on John Sheehan's photo
Thumbnail

JULYWP

"Summer colors on this white perch!"
Sunday
Jeffrey D. Abney commented on John Sheehan's photo
Thumbnail

JULYP

"Nice Yellow John….good colors"
Sunday
Jeffrey D. Abney replied to Jeffrey D. Abney's discussion Panfish Species of North America- Which Ones Have You Caught?
"Often bass fisherman will catch Warmouth on 9” worms……..they. don’t fight…"
Sunday
Jeffrey D. Abney replied to Jeffrey D. Abney's discussion Panfish Species of North America- Which Ones Have You Caught?
"This is a great comparison John…..I added another photo to give perspective….."
Sunday
Bruce Tomaselli commented on Jeffrey D. Abney's photo
Thumbnail

Sunrise Shellcracker…..7/23/2025

"I sure envy you, enjoy!"
Sunday
John Sheehan replied to Jeffrey D. Abney's discussion Panfish Species of North America- Which Ones Have You Caught?
"Hey Jeffrey! Does the Warmouth have about the same sized Mouth as a Black Crappie of equal size, or…"
Saturday
Jeffrey D. Abney posted photos
Jul 23
Jeffrey D. Abney replied to Jeffrey D. Abney's discussion Panfish Species of North America- Which Ones Have You Caught?
"Some quality Warmouth I caught in my early years on the Albemarle….."
Jul 23
Jeffrey D. Abney replied to Jeffrey D. Abney's discussion Panfish Species of North America- Which Ones Have You Caught?
Jul 23
Jeffrey D. Abney replied to Jeffrey D. Abney's discussion Panfish Species of North America- Which Ones Have You Caught?
Jul 23
Jeffrey D. Abney posted photos
Jul 23
Jeffrey D. Abney replied to Jeffrey D. Abney's discussion Panfish Species of North America- Which Ones Have You Caught?
"Thanks for sharing John……you have patterned your available species pretty good over…"
Jul 23
John Sheehan replied to Jeffrey D. Abney's discussion Panfish Species of North America- Which Ones Have You Caught?
"Only caught five of these Species up here in New Jersey. Bluegill, Pumpkinseed, Red Breasted…"
Jul 23
Jeffrey D. Abney posted a photo

Crackers Saved This Morning Behind A Cold Front…..7/23/2025

If I get out the remainder of July it will probably be a crappie stalk on the coastal marsh……
Jul 23
Jeffrey D. Abney posted photos
Jul 23

© 2025   Created by Bluegill.   Powered by

Badges  |  Report an Issue  |  Terms of Service