Bluegill - Big Bluegill

Do you love big bluegill?

Big Fish Story

A friend of mine & I drove up to Deep Creek Lake from Manassas, VA early Tuesday morning to spend 2 days fishing. We stayed with Don at Streams and Dreams. What a wonderful experience it was- and what a wonderful host. We were welcomed like old friends and he quickly introduced to our 'new home'.

Don is and avid sportsman and environmental scientist with many experiences and fascinating stories to share. We stayed up until about 11pm swapping stories & sharing ice fishing secrets. My favorite story of Don's was about the 47" steelhead that he caught & released- complete with amazing photo.

Here is the story:

Much of our discussion with Don that evening was about techniques for targeting 'bull' bluegill. We headed out at 6am for Turkey Neck, my own personal favorite big bluegill area. We were soon set up had had a decent day of fishing, with 2 perch over 14" and 3 bluegill over 9". My friend Gary was the bluegill master, with (2) 9" beauties.

It was mid afternoon about 4pm & I hadn't yet caught a bull bluegill. I decided to improvise and tied a pre-tungsten tiny red and black #16 jig to my spring bobber pole and checked the depth with my lead depth finder. I was a little surprised to find that apparently about 2" of weeds were still on the bottom in 22' of water. (When I carefully lowered the tiny jig, I found that it stopped falling about 2" above where the depth finder indicated.) I put the rod on the ice supported by my plastic ice-auger blade protector, with the jig, tipped with one spike (maggot) hooked through the head, and suspended about 1.5" above the weeds. Rather than jigging, I merely touched the rod with my fingertip to make the jig vibrate,

Suddenly, the spring bobber trembled ever so slightly, and like lightning (At least as fast a my 64-year old body can still move after 2 days of digging holes in ice :-) ) I set the hook. It was immediately clear that this was a big fish and that the hand-over-hand method wasn't a good idea. I use 4"-test P-line fluorcarbon-coated line, and ALWAYS set my drag very lightly.

It was like playing any big fish. It ran with the line and I had to use the rod to gain leverage to reel in a few feet of line at a time. This went on for several minutes while I carefully played the lunker. Finally I was able to see the fish through the hole drilled with a 6" auger. I carefully pulled the fish into the hole and the head emerged, only to have the body get stuck.

I dropped to my knees & grabbed the fish by the mouth & tugged; nothing happened, the fish was stuck in the hole. I adjusted my grip & pulled hard and out popped (literally) one monster bull bluegill, over 10" long, nearly as wide as it was long, and weighing well over a pound.

Now for the most important part of the fish story; what was it eating? I carefully dissected the stomach & large intestine looking for clues. The answer, perhaps not surprisingly given the cold water temperature was not much. I found remnants of several very small insect larvae, perhaps a small caddis, and one small fresh-water shrimp.

I'm attaching a photo of the bull bluegill with a perch & walleye for comparison. The walleye is just over 15" & the perch is 15". dclbigfish.JPG  dcljig.JPG

I'm also attaching a macro photo of the jig.

I want to thank Don again for his generous hospitality, and hope to visit Streams & Dreams again soon.

John Steinbach

Views: 1515

Reply to This

Replies to This Discussion

Sweet,

Sounds like a great trip John,

From a good old sothern boy,, I really dont know about all that Ice stuff, sounds really cold but for a gill like that I might give it a try...

Thanks for shairing and congrats on the monster gill...

John

Wow John!  I just read your story and am impressed!  What a NICE Bluegill!  I think I have the same rod as you.. An older Quantum Microlite?  4.5 foot.  How do you like that Quantum/Zebco underspin reel?  I understand that those reels have really smooth drags.  I may have to get one of those for my 2 lb test jigging, but my fishing partners that use only the best spinning reels (Shimano Stellas and Pflueger Supremes) will laugh me off the boat...

Jeff,

You might look into a Zebco 11 spincast micro reel. I use the spincast reel because I can control the cast better than the spinning version. The Zebco 11 is a quality product with stainless steel and ball bearings. Zebco 11 . Your friends might laugh, but you can console yourself by reeling in the fish.

 

I envy you northern folks the chance to go ice fishing. I expect you are more comfortable on the ice than we are in a boat on the cold lake.

RSS

Latest Activity

John Sheehan commented on Jeffrey D. Abney's photo
Thumbnail

Crappie on the Albemarle….3/13/2025

"Hope it pans out that way for us all, Jeff! And yes, the bites happening later in the day after the…"
16 hours ago
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Crappie on the Albemarle….3/13/2025

"Thanks John….with the time change we gain some daylight after work which is a good…"
17 hours ago
John Sheehan commented on Jeffrey D. Abney's photo
Thumbnail

Crappie on the Albemarle….3/13/2025

"Good to see you posting good fish again after the winter slow down!  Greg and I had our first…"
17 hours ago
Jeffrey D. Abney posted photos
18 hours ago
Jeffrey D. Abney posted photos
19 hours ago
Jeffrey D. Abney posted a status
"After a rough winter by North Carolina standards…we have experienced a warm up and it was time to go wet a line this afternoon, 59.2 degrees"
19 hours ago
dick tabbert commented on Bruce Tomaselli's photo
Thumbnail

foam bugs

"Great looking flies Bruce."
Mar 8
Bruce Tomaselli commented on DAVID L EITUTIS's photo
Thumbnail

8/18/12

"I sure will. The baetis wet fly is a size 18 and the cicada is a size 8. Although I tied them for…"
Mar 8
DAVID L EITUTIS commented on DAVID L EITUTIS's photo
Thumbnail

8/18/12

"WILL YOU POST PICS AGAIN OF YOUR WORK BRUCE? THANKS TOOTY"
Mar 8
John Sheehan commented on Bruce Tomaselli's photo
Thumbnail

foam bugs

"Nice work ,Bruce!"
Mar 8
Bruce Tomaselli commented on DAVID L EITUTIS's photo
Thumbnail

8/18/12

"I found it on YouTube, David. I'll be tying some for the upcoming crappie and bluegill spawn."
Mar 7
DAVID L EITUTIS commented on Bruce Tomaselli's photo
Thumbnail

foam bugs

"GREAT LOOKING BUGS BRUCE , BET YOU CATCH A BUNCH ON THOSE....."
Mar 7
DAVID L EITUTIS commented on DAVID L EITUTIS's photo
Thumbnail

8/18/12

"HEY BRUCE, IT'S TO HARD TO EXPLAIN HOW TO MAKE EM , BUT I HAVE SEVERAL VIDEO'S ON MAKING…"
Mar 7
Bruce Tomaselli commented on DAVID L EITUTIS's photo
Thumbnail

8/18/12

"They look like good crappie flies. Do you have a pattern to share for it? "
Mar 7
DAVID L EITUTIS commented on DAVID L EITUTIS's photo
Thumbnail

8/18/12

"HEY BRUCE , I USED TO for the first 20 or so years I used em.........now I have to tip em for some…"
Mar 5
Bruce Tomaselli commented on DAVID L EITUTIS's photo
Thumbnail

8/18/12

"Anyone every fish jigs, like the Silent Stingers, and catch fish without tipping them with waxies,…"
Mar 5
dick tabbert commented on DAVID L EITUTIS's photo
Thumbnail

8/18/12

"Nice"
Mar 4
Bruce Tomaselli commented on DAVID L EITUTIS's photo
Thumbnail

DSCN0020

"That's sure neat compared to mine."
Mar 3
John Sheehan commented on DAVID L EITUTIS's photo
Thumbnail

DSCN0020

"Great tying Space, Tooty!"
Mar 3
DAVID L EITUTIS joined bluegillboogieman's group
Thumbnail

HOW TO

A place to put explicit details of how to. Like how to remove a hook from your buddy's ear, or how…See More
Mar 2

© 2025   Created by Bluegill.   Powered by

Badges  |  Report an Issue  |  Terms of Service