Bluegill - Big Bluegill

Do you love big bluegill?

What vise do you use and why?

Views: 209

Replies to This Discussion

I use 2 variations of the Super A vise.
Why? It's cheap and holds the hook. \
I'm always looking for a good vise at a good price.
suggestions welcome.
i have one that came with my fly tyin kit. but i have upgraded to the danvise. i wont be abll to use till after my b-day. i got the danvise of of eveilbay for 75.00 shiped to the door,
Peak,it holds,i tye tight flies,them gills and chinks are hard on em.



gators eat my fish
http://www.togenenterprises.com/catalog/item/4130012/7557925.htm
This is a tough and heavy vice holds size 22 to 1/0 tight. Had it for years.
I have to agree with Mike F: the DanVise is the best bang-for-the-buck. I bought one back in '08 (I think), and, although I KNOW there are better vises, I don't feel the need to get one. I've tied as small as #14 (about as small as I can see w/o the magnifier) and as large as 1/0 (largest I expect to ever need), and the DanVise handles them all. For the price, I have yet to find another (new) vise to compare.
I've tied on a Dyna-king for 30 years, it will hold any size of hook, it has been a good work horse vise for me, I tie upwards of 5000+ flies a year, and have for 20 years or more, so for what it is worth :)
I have an older model Regent vise (similar to the one Greg shows) and have had it for about 15 years. I have never had a problem with it. I haven't ever used a rotary type vise, so I don't really know if I am missing anything. Of course I had a tube TV with no cable until everything went digital. Did you know there are channels with no commercials now? Whodathunkit?

I think the key points for a good vise are:
1. Securly holds whatever hook sizes the user will EVER possibly use.
2. Has easy to operate thumb screws, levers or whatever so that getting hooks in and flies out is easy.
3. Has some sort of rock solid base; either a table edge clamp or pedistal (I have both) that doesn't slip up or down, or flop off in your lap when you exert a little down pressure (or a lot for that matter).
4. Has enough up and down adjustment so the user can raise or lower the jaws to a comfortable working height; and it stays there.
5. Fits within the budgetary constraints of the user (this is a little subjective; I know). More expensive vises are not always better, as said by other folks here.

All that being said, my first tying vise was a pair of small vise-grips welded to a piece of re-bar and stuck into a hole that was drilled in a chunk of 4X4. My Dad helped me make it when I was a kid 35 years ago. I still have it. It still works.

Times change I guess. Maybe I should look into the rotary vises to go along with my new flat screen TV and cable. Next thing you know they will come up with a new fangled material to make flyrods out of and then bamboo ones will get really expensive... Naw! Some things are just too ridiculous to believe.

Keith

RSS

Latest Activity

Jeffrey D. Abney posted photos
9 hours ago
Jeffrey D. Abney posted photos
9 hours ago
John Sheehan posted a photo

Colorado Spinner gets 3 species

So far this year, this little cost-effective Colorado spinner has gotten many a Bluegill as well as…
21 hours ago
Jeffrey D. Abney posted photos
yesterday
Jeffrey D. Abney posted photos
yesterday
Jeffrey D. Abney posted photos
yesterday
Jeffrey D. Abney posted a status
"Joe and I got in a morning trip ahead of the heat wave….a mix of 64 fish with mostly Coppernose in a sandy creek channel…..82 degree water…"
yesterday
John Sheehan commented on John Sheehan's photo
Thumbnail

Colorado Spinner gets 3 species

"Sorry Bruce! A before Coffee reply to your question was addressed to Dick! Giving these Colorado…"
Friday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Always Calm Behind Heavy Thunderstorms…..6/17/2025

"Thanks Marvin…..it’s beautiful area very close to the Atlantic Ocean……I…"
Friday
Bruce Tomaselli commented on John Sheehan's photo
Thumbnail

Colorado Spinner gets 3 species

"Good job. Catching fish on your own creations is more exciting."
Thursday
John Sheehan commented on John Sheehan's photo
Thumbnail

Colorado Spinner gets 3 species

"Generic I guess, Dick. Assembled from one #12 hook two small barrel swivels, a small spinner blade…"
Thursday
dick tabbert commented on John Sheehan's photo
Thumbnail

Colorado Spinner gets 3 species

"got to love them spinners"
Thursday
Marvin Morgan commented on Jeffrey D. Abney's photo
Thumbnail

Always Calm Behind Heavy Thunderstorms…..6/17/2025

"What a serene place to drop a line!! Looks like a place I sure would like to put my little flat…"
Thursday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Always Calm Behind Heavy Thunderstorms…..6/17/2025

"Understand Bruce….live near a cabbage farmer and saw them picking them…"
Thursday
Bruce Tomaselli commented on Jeffrey D. Abney's photo
Thumbnail

Always Calm Behind Heavy Thunderstorms…..6/17/2025

"We've had nothing but rain here in south-central, PA. The farmers can't plant and…"
Wednesday
Bruce Tomaselli commented on John Sheehan's photo
Thumbnail

Colorado Spinner gets 3 species

"Nice, John. Is that a generic name or the name of the spinner?"
Wednesday
Jeffrey D. Abney posted photos
Tuesday
Jeffrey D. Abney posted a status
"Got a window this morning after all the storms the last four days…water falling on the coastal marsh was a beneficial thing with the crappie"
Tuesday
John Sheehan commented on John Sheehan's photo
Thumbnail

Wanaque river Trout

"Thanks Guys,a leaper from the fast water always excites!"
Tuesday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Good Shoulders. On this One….6/12/2025

"Thanks wag….I imagine the summer heat has set in down in Louisiana!"
Tuesday

© 2025   Created by Bluegill.   Powered by

Badges  |  Report an Issue  |  Terms of Service