Bluegill - Big Bluegill

Do you love big bluegill?

I'm new here and wanted to introduce myself. I'm stationed at Shaw AFB in Sumter SC. The fishing here is great once you find out where the buggers are hiding.

I like to see what folks are using and what their rigging ideas are.

This is what gets to to the fish. A Vapor 10. I have a console that clips to the cockpit combing. It is made of PVC pipe with a board to mount the fish finder..pliers..rod holder..and an adjustable mount for my phone so I can shoot video or use mavrick for navigation. The mount is made from a paint roller so it makes a great place to stage my lures.

I have an LED light mast on the back. Made that from pipe and led strips from amazon.

The anchor trolley needs some work. I will move the read pulley forward a few inches to help it work more smoothly.

My stake out pole is an aluminum broom handle that is partly filled with sand to make sure it hits bottom point down. The point is a a paint roller handle. The roller part was cut off and the stud that was left sticking out was sharpened. It works great.

I can go out and buy ready made equipment but I like the challenge of using other items. Its cheap n saves the money for more fishin trips.

What do yall roll around in?

Views: 1295

Replies to This Discussion

Be advised that you have to be VERY careful when running any kind of set lines from a kayak, like Trotlines, limblines, bank lines, etc.  It's VERY easy to run into complications and trouble in a vessel as small as a kayak, when you have a large, powerful, ANGRY cat on a short line.  Keep a knife handy, and preferably a partner.

Brian, something.  You had a very nice idea of using roller paintbrush to hang lures on.  However, you might want to swap that out with a small section of pool noodle.  Easier to remove hooks from.

I like that Idea Allen. Your right if the hook goes too deep it don't wanna come out. A big cat can be a challenge to wrestle. I did a little limb lining on the capefear river from a canoe. The water was fast and it whipped my boat all over the place.
Also, let me extend my thanks for the voice of reason, Allen. I know its hard won advice. Thanks for looking out.
Ill also concur that closed cell foam in its many forms, has 1001 uses. I actuallt collect the stuff!

I make my jugs out of, and use it to pad the crossbars on my vehicle to cushion my yak.  I've thought about zip-tying a short length to the top of my milk crate, to hang various lures on as I take them off.  But then, I'm going to be getting into my plano boxes anyway, so I just put them back.

It would let um dry before puttin um back in the box
Yeah I'm gonna have to keep my eyes out for a large hunk of packaging foam to cushion my canoe in the truck.
Okay gillyakkers, paddlers and plastic boaters, it's official:
I'm now the owner of a very nice Mad River Adventure 14 hybrid canoe.
The Chehalis float tube is officially up for sale, and I will ship! LOL
Yey congrats!!! Now go break her in. I may have some pool noodle type foal sheets available. Ill check when I get home. What size would you like.
I'm hoping to get her out Monday.
As for foam, no need to send me any. I'll find something. In fact, I believe I have some big pieces in the shed.
Did ya get to try it? How did it go?
Not yet; Monday had other plans.
But I'm not in a hurry- I'll own it for years!
Thats true. I am really hopin to get some hydro therepy this weekend ; weather permitting I will try to explore some deeper parts of sparkleberry swamp.

RSS

Latest Activity

John Sheehan added a discussion to the group Lure History
Thumbnail

Discontinued Lures

Some of my favorites I can't find anymore: Acme Fash King Flutter Spoon, Eppinger Flutter Chuck,…See More
17 hours ago
John Sheehan posted photos
20 hours ago
John Sheehan commented on John Sheehan's photo
Thumbnail

25"+Spoon Pick

"25+inch Pickerel was best of the 13 Fish caught today a day after the Worm Moon. Two Bass and the…"
yesterday
John Sheehan commented on dick tabbert's photo
Thumbnail

IMG_0186

"1/16th oz., good!"
yesterday
dick tabbert commented on dick tabbert's photo
Thumbnail

IMG_0186

"These are my last build. I added more colors."
yesterday
dick tabbert commented on dick tabbert's photo
Thumbnail

IMG_0186

"No Jon I went with the 1/16 oz jig heads so I could have a larger hook for crappies. It's a #4…"
yesterday
John Sheehan commented on dick tabbert's photo
Thumbnail

IMG_0186

"Colors are great !"
Monday
John Sheehan commented on dick tabbert's photo
Thumbnail

IMG_0186

"Thats a good Crappie size! Are they 32nd Oz Jigs?"
Monday
dick tabbert commented on dick tabbert's photo
Thumbnail

IMG_0186

"They are right at 2" long."
Monday
John Sheehan commented on dick tabbert's photo
Thumbnail

IMG_0186

"I Can see Crappie and Bass chomping on them, Dick!"
Sunday
dick tabbert commented on dick tabbert's photo
Thumbnail

IMG_0186

"I made these up for crappie in mind. They might be a little big for gills unless it a bigger gill."
Sunday
John Sheehan commented on dick tabbert's photo
Thumbnail

IMG_0186

"What Species you got in mind for these great Minnow ties , Dick?"
Sunday
dick tabbert posted photos
Sunday
John Sheehan commented on Sam k.'s group Trout Bums
""Trout Season opens April 6th 2024 in New Jersey. Waters are runnin' high for…"
Sunday
John Sheehan commented on John Sheehan's status
"An Instrumental Guitar recording of mine to commemorate. …"
Sunday
John Sheehan posted a status
"Trout Season opens April 6th in New Jersey. Waters are runnin' high for stocking."
Sunday
John Sheehan replied to John Sheehan's discussion Plastic Worm varieties in the group Lure History
"My favorites through the Years: Manns Jelly Worm, Manns Auger tail, Charlie Brewers 4" on a…"
Sunday
John Sheehan replied to John Sheehan's discussion Plastic Worm varieties in the group Lure History
Sunday
John Sheehan replied to John Sheehan's discussion Plastic Worm varieties in the group Lure History
Sunday
Troy Dorman commented on Troy Dorman's photo
Thumbnail

1000003444

"Thank you, Jeffrey!"
Sunday

© 2024   Created by Bluegill.   Powered by

Badges  |  Report an Issue  |  Terms of Service