Bluegill - Big Bluegill

Do you love big bluegill?

     I have been using a 7 inch Eskiimo hand auger for years. I have been thinking about going to a drill/ice auger combo. Probably a 5 or 6 inch auger to be able to drill more holes. I was wondering what others are using that they like?

Views: 115

Replies to This Discussion

Hi...I've been using a 6" laser auger with a clam plate and a Milwaukee fuel 18 for few years now....the laser was one I've had for years and with the plate/drill.....what a difference, with the 4.5 ahr battery I can drill as many holes I need for 1 or 2 days..I also bring a spare battery along just in case.. Haven't had to use it yet. I'm 71 yrs old and this is so much easier than hand or gas auger....my 2 cents. Been out once already did decent with 17 nice gills and few sunnies.Good luck.

Thanks John, the lazer auger is one I'm considering. I've been looking at drills, it looks like amp hours is important. Good luck and stay safe on the ice.

I have a Milw fuel 18 and use both a 5" and 6", both are lasers from hand drills. I use a 5 ah lithium battery and have yet to run out of juice, most often after all day of drilling I still have 2 bars of power left.  Two things to look at for electric drills, lithium batteries, and torque of the drill. General rule is you want a minimum of 750 in. # of torque, Milw fuel has about 1200. Depending on how quickly I find fish, I may drill 30 to 90 holes on an outing. Good fishing and be safe 

Thanks Dave for your reply. I,ll have to pay attention to torque and amp hours of any drill I buy.  I would like to drill more holes and move more than I do drilling by hand. Thanks

You want a hammer drill with a 1/2" chuck, a battery with as many amp/hours as you can afford, and as mentioned, at least 750 in/lbs of torque.  Don't use the hammer setting, leave on Drill, setting #1.  I have a buddy that uses as Milwaukee m18 hammer drill.  He can drill as many holes as he wants, all day.

You might want to go Youtube and watch some head-to-head videos on drills and/or augers.  Some augers are better at different things.  Some drills are cheaper, but have a "thermal cutoff" that kills the drill until it cools down.  This really doesn't help if you're drilling 40 - 50 holes a day, but if you're only drilling a few, then fishing, then moving, then drilling a few more, it's no big deal.

I'm still getting started with ice fishing.  I've been using an Eskimo 8" hand auger.  Lots of effort in that one.  I've been thinking about a drill.  I just bought a HT 6" hand auger.  I'll start there.  Smaller augers are easier on the drills, from what I hear.

Since I typically only drill two holes, getting a cheaper drill with a thermal cutoff is probably what I'm going to do.

Thanks Allen, I wondered why I have seen hammer drills recommended, I guess for the torque and maybe amp hours. It seems like Milwaukee drills are popular for this.

It seems like most folks use either the m18 Fuel or the DeWalt.  But, drill/battery/charger for each of those is going to run you $300.  Some folks are using the Rigid Octane with good results, but that is one of those that has the thermal cutoff.  I saw another video where the guy was using a Ryobi, with is somewhere around $100.  That also has a thermal cutoff, so you won't be drilling 20 - 50 holes at one time and then fishing.  The guy that did that video said he typically drills 5 holes, checks those, and if they'll all fish-less, moves on and drills 5 more holes.  Never has a problem with the Ryobi like that.

The K-Drill has chipper blades, which takes more torque to cut ice.  That auger will also reopen old holes.  Most augers have shaver blades, which are easier on a drill.  And, of course, the smaller the auger, the easier it is on a drill.

I'm seriously thinking about the Ryobi.  I don't drill a lot of holes, so it might just be perfect for me.

Thanks Allen. I'd like to drill more holes than I do with a hand auger, but still don't think I would be drilling that many. I may look at the Ryobi.

N/P.  I just went and looked at them today.  The one to get is the only hammer drill offered, it's $159.99 with a 4ah battery and charger.

RSS

Latest Activity

Jeffrey D. Abney posted a photo

Best of 2020........

My son-in-law was very happy in early May when a drifted live cricket produced his personal best…
10 hours ago
Jeffrey D. Abney posted photos
12 hours ago
Jeffrey D. Abney posted photos
12 hours ago
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Best of 2020........

"Thanks for the update Leo......I hope things are ok......miss his input here........"
13 hours ago
Kelly Peterson commented on Kelly Peterson's status
"too fast fingers. after learning this from Slip Sinker-thanks Ken"
yesterday
Kelly Peterson commented on Kelly Peterson's status
"That’s the way I usually fish with 1/64 ounce jigs tipped with 1” or so plastics and 2#…"
yesterday
Leo Nguyen commented on Jeffrey D. Abney's photo
Thumbnail

Best of 2020........

"Jeffrey, sorry, haven't heard from him. I've rode my bicycle along Perris Lake every few…"
yesterday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Best of 2020........

"Thanks Tooty.......last year there nothing else to do.........just so happens that aligns with my…"
yesterday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Best of 2020........

"Thanks Leo.......any word from LedHed........I miss his pictures already........"
yesterday
Andre Sturkey commented on Andre Sturkey's photo
Thumbnail

Titus's first fish

"Thank you fellas!"
yesterday
Andre Sturkey commented on Andre Sturkey's photo
Thumbnail

BLESSED

"Thank you fellas truly BLESSED"
yesterday
DAVID L EITUTIS commented on Jeffrey D. Abney's photo
Thumbnail

Best of 2020........

"WOW JEFFERY , GREAT COUNTS AND PICS AS USUAL.........CONGRATS TO YOU BUDDY"
yesterday
Leo Nguyen commented on Jeffrey D. Abney's photo
Thumbnail

Best of 2020........

"Wow. Splendid counts even from the solo outing. Water bodies around you sure produce great ones…"
yesterday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Best of 2020......

"This was one of my top gills in 2020 Leo.......by myself so no great photos on a hot day........I…"
yesterday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Best of 2020........

"Thanks Leo and good to hear from you......fortunately Governor Cooper maintained all the great…"
yesterday
Jeffrey D. Abney commented on Mikey-D's photo
Thumbnail

20210115_102746

"We're fighting rain and wind down here Mikey.......I've been reposting my favorites of…"
yesterday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

A 1/64 Ounce Olive Grass Shrimp Version on a Sickle Hook

"These were homemade but I will get some  commercial options out this weekend and display…"
yesterday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Best of 2020........

"I'm always humbled by this estuary and all it offers.........this is a bonus fish and the…"
yesterday
Kelly Peterson commented on Jeffrey D. Abney's photo
Thumbnail

A 1/64 Ounce Olive Grass Shrimp Version on a Sickle Hook

"Where did you get these from? We don’t have grass shrimp available here so what would you tip…"
yesterday
John Sheehan commented on Jeffrey D. Abney's photo
Thumbnail

Best of 2020........

"Magnificent fishery there ! I see the big ones in the small streams I get them in at only a thick…"
yesterday

© 2021   Created by Bluegill.   Powered by

Badges  |  Report an Issue  |  Terms of Service