Bluegill - Big Bluegill

Do you love big bluegill?

Tungsten slotted beads… who’s using the versatility of the beads in their Micro-fishing methods and How?...

Views: 1153

Replies to This Discussion

...those are great tips Allen!

...you sure got a head start on me, Kelly... I haven't begun collecting materials yet... for me, I'm thinking the 3.8 or 4 mm beads to get in that tiny 1/64 range... I'm really comfortable casting with my setups with approx. 1/64th.

so you have the heavier wired jig heads are you considering lighter wire hooks to negate crushing the barb.

nice flexibility to add a bead or to in the design of a bait

yeah I tried going smaller... securely hooks the smaller fish... but some of my big ones got away going smaller than #12

my interest really struck a nerve in a good way, with bead utilization in jig design is that one is not limited to jig hook styles and sizes. regular ball jigs are designed to be fished vertically given the line attach point at the top of the ball. for me, I swim them in after a long-cast so utilizing a regular hook style and bead combination would better for the presentation. more weedless I noticed when using with the swimming method. there is that snag pinch point between the eye of a ball jig and the ball itself that harasses me with algae and weeds during the cast.

are you preparing anything for the upcoming hard water season?

Hi Ken

Yup am going to use some of the light wire 3261 Mustad Aberdeen hooks that I have a bunch of. Have bent them for 90 degree jigs but will do 60 & 45 degree bends to them because I too do very little vertical jigging, almost all long casting and retrieving via bouncing off bottom/let fall/repeat bact to me. Stikes happen anywhere from soon as jig hits water till just as I’m removing from water. Of course these jigs are always tipped with something, mostly Gulp Alive Waxies or 1” minnows. Sometimes Helgramites or other scented tiny plastics are used and even little red worms.

Regarding the impending ice season am going to buy a small flip over ice shed and do some ice fishing. I consider myself a novice when it comes to hard water. Am anxious to try John McKeans way of mounting the Waxies, although don’t know how it can be any better than the way we do it.

...that would be the problem for me... i used to love experimenting... but the success rate for this method is top notch for me the past few years is that i am hesitant to try anything else. heck tipping with the Lil Minnow stays dry alot nowadays... lol

I figure going tungsten on selected hooks enabling a swim jig style attach point in the front would tweak me in a positive direction... I was impressed with Allen's ice fly productivity that he sent me... lost it to a toothy pred...

From top to bottom in above picture.

#8 Mustad Aberdeen light wire 3261 hook.

Above same hook with approx 60 degree bend.

Again same hook with approx 45 degree bend.

Will add various slotted tungsten beads to the above.

My attempt at making jigs without molds. #6 Mustad Aberdeen light wire 3261 hook with 90 degree bend. Then I added a lead split shot to bend of hook, mashed it in place with pliers. Used fingernail paint and sparkly finish over that.

Another homemade jig with a #6 red Aberdeen hook with 90 degree bend and lil minnow. These jigs are approx 1/32 ounce or slightly thereabouts.

My most productive setup this past summer. About 1/40 ounce trout magnet style jig head tipped with Gulp Alive Waxies. Sometimes two Waxies were used.

Small tungsten ice jig with Waxies tipped John McKean style, I think?

Finally another very productive jighead this past year. 1/32 ounce with Waxie installed John McKean style, I think. Really believe eyes on jigs are an advantage. Plan to add some stick on eyes to some eyeless jigs this winter.

Kelly, you might want to head over to jigcraft.com.  LedHed and I are both over there.  Lots of info regarding painting, pouring, tying, etc. 

Allen a couple years ago I tried to sign up at jigcraft but nobody authorized me. Has this changed?

Wow, I didn't know that.  All I can tell you is that it's a slow forum, and seems to have slowed down from what it was 2 years ago.  All I can say is to try again?  Maybe if you give me the handle you were using, I can contact one of the owners and ask them.

These are my tungsten slotted bead jigs.  Ones on the left weigh ~1/64 oz 4.0 mm bead, top two on Daiichi 1130 size 12, bottom on a Gamakatsu J20 size 12.  Ones on the right weigh ~1/32 oz 4.6 mm bead, top two on Daiichi 1130 size 10, bottom on a Gamakatsu J20 size 10.  My go to is the 4.6 mm Daiichi 1130 #10 tipped the a gulp waxie.  The fine wire size, big gap and mirco barb = good hook-ups at long distance with my slip float setup.  Beads are attached as explained HERE with lead filings and crazy glue

Steve… A very nice assortment of jig set-ups… I like the idea of the super glue to bond to the hook… have you also tried thread?

Slip, I use super glue and lead filings.  The glue by itself won't work.  The filings fill in the gap around the hook and the slot and the super glue bonds the whole thing together like its soldered on. 

I'd probably use thread if I was tying flies bodies on the hook, but not sure if the bead would stay oriented correctly though.  On the Daiichi hooks, the slot is towards the hook eye and the eye will go into the slot if the bead can rotate.  

RSS

Latest Activity

Jeffrey D. Abney posted photos
yesterday
Jeffrey D. Abney posted photos
yesterday
John Sheehan commented on Jeffrey D. Abney's photo
yesterday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Trouble for my Eagle Claw/Z Man Plastic…….6/22/2024

"Yes…..especially large bass…I always hope to grab a picture and release but I want to…"
yesterday
John Sheehan commented on Jeffrey D. Abney's photo
Thumbnail

Trouble for my Eagle Claw/Z Man Plastic…….6/22/2024

"I guess you fish 12 # test for Gills because of this possibility!"
Saturday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Saturday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Saturday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Saturday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Saturday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Trouble for my Eagle Claw/Z Man Plastic…….6/22/2024

"Thanks John…this was a train wreck on light tackle……I was fishing a foot deep…"
Saturday
John Sheehan commented on Jeffrey D. Abney's photo
Saturday
Jeffrey D. Abney posted photos
Saturday
Jeffrey D. Abney posted photos
Saturday
Jeffrey D. Abney posted a status
"With a UV index of 11 today,I splashed early and picked up at nine. we’ve had low water for ten days in a row.Mixed six species for 88 fish"
Saturday
John Sheehan replied to John Sheehan's discussion Lure Histories in the group Lure History
"The Beetle Spin When Virgil Ward set out to create a new lure back in 1948, he had no intention of…"
Friday
John Sheehan replied to John Sheehan's discussion Lure Histories in the group Lure History
"Classic Fishing Lures That Have Stood the Test of Time   Outdoor America Article…"
Friday
John Sheehan commented on Jeffrey D. Abney's photo
Friday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Biggest of Ten Largemouth Today…..6/19/2024

"Thanks John…..you can see how black and tannic the water was in this area…."
Thursday
John Sheehan commented on Jeffrey D. Abney's photo
Thursday
Jeffrey D. Abney posted a photo

Biggest of Ten Largemouth Today…..6/19/2024

The bass were harassing the shallow gills today so we cross paths with a few that gave up their…
Wednesday

© 2024   Created by Bluegill.   Powered by

Badges  |  Report an Issue  |  Terms of Service