Bluegill - Big Bluegill

Do you love big bluegill?

I have been having trouble locating some of my favorite quill bobbers: natural quills, wire loop at the bottom, small rubber band around the middle of the quill. Does anyone have any good sources for these?

Views: 5075

Reply to This

Replies to This Discussion

Sharon, I could make you a Crimson Topped Boogieman Special that says in bold letters BAMA , sorry we dont do them in Longhorn Orange, thats a personal thing after spending time on the field in the old Southwest Conference, or I can make you one so you can show your support for our Arkansas RAZORBACKS.

you can find them at inkminers.com if you're still looking!

Bass pro shops carried them at one time. The selection (1dz) included 3 sizes which I liked because the large ones(8-9 inch)were hard to find. Check the master catalog. I haven't needed any in a while so I'm not sure they still carry them.
Yes, I got some from them some years ago, but they are no longer in their catalog.
I saw them listed on the h&h tackle site, but I think they were out at the time. these are the same folks that make the cajun spin, cajun crawler, and the cutie pie, and spin. yes they are very hard to find.
You can buy them in store in Bass Pro in Prattvile, Al and Spanish Fort, AL. Probably other southern Bass Pro shops. I couldn't find it in their online catalog. H & H Lures from Louisiana sells them, or did. There may be some kind of endangered species thing or Native American tradition thing that is causing a supply problem. I bought a dozen in a going out of business bait shop locally. That may be the real problem, not enough demand!!! At the same store, there were balsa floats shaped almost as thin and obviously made to imitate natural quills. I tried one, but the real deal is a little better I think.

You can find plenty of African porcupine quills on Ebay. Make your own! They are sold for craft making, necklaces and earrings and so forth. There are even some made up fishing quills, but the makers are real proud of them, if you know what I mean.

If you wanted to bid and make your own, go for the fatter ones in the 6" to 9" size. When you get them, cut the straight part of a long shank hook off and super glue that to the smallest, most tapered end, with the eye just below the bottom. Let that dry, then wrap the end with thread, OR with 0.20 lead thread from a fly ting shop. The lead thread helps the quill stand upright in the water, with less "sinker" weight needed on the fishing line. You'll have to experiment to get the right amount wrapped. Then super glue the wrapped part. Paint the top with waterproof paint, preferably as described by LOFR. The "O" rings he describes are available at Lowes in the plumbing section. ASk for help and get the tiny ones. They stretch a little, and don't rot as easily as what comes on the store bought variety, when you can find them. I have even used size .60 Run your line through the "O" ring and roll it down from the top painted part, then through the eye at the bottom. Tie on your hook and use the least sinker possible to get the float to stand up vertical, with just the top part out of the water. If you use lead thread to wrap the eye, don't use so much that it stands up no matter what. You want it to lie flat if your bait is on the bottom, stand up when it's not. These methods were taught to me by LOFR, right here on BBG.com. I have to agree with him, you really can tell if a bluegill just licks your bait with one of these.
I got a couple of packages of "Thrills" at Bass Pro. Going to try them out today. Later, I will fix them up like you said.
Thills ain't quills Sharon. Thill is a name brand of mass produced floats of various sizes and styles. I have used a few slip floaters from them and they were fine. The real deal quills are better for the so called cane pole fishing I do. That's an opinion, but it's a strong one.

You said thrills. You may have intentionally misspelled thill or quill to mess with the Boogieman. I'm not sure. I don't have to be. I do have to get you back. Wonder when is all you have to do.
I understood when I bought them they were artificial quills, but it was the closest thing I could find. I'll let you know how well they work. ME, mess around with your head????

Report back to me about them after use. Why do they have the fat part on the underwater end?
The fat part has a hole through the tip for the fishing line and hook. I think it is supposed to help balance the bobber upright, but I still had to add 1 split shot weight to get it straight. The clerk in the store seemed to think it was supposed to lay on it's side, but what's the point of that? I didn't think it's any better or worse that any other bobber.
Did you catch any because of it? That is something I can honestly give credit to a real quill for. Last time out, half the gills I caught the quill never went under, but it told me they were there. Now that is what it means to be a sensitive float.

The float needs to be standing up with just an inch or so above the water line. Keep your eye on it for subtle lifts or tilts. Those are the ones you never know are there. If it goes down under, of course you set the hook. But if it just winks at you, wink back while you're hooking one.

RSS

Latest Activity

John Sheehan commented on Jeffrey D. Abney's photo
Thumbnail

Full Worm Moon…..3/7/2023

"Mild Winter for the most part up here in NJ. Though we did have two days of freezing temps and…"
5 hours ago
Jeffrey D. Abney posted a photo

Full Worm Moon…..3/7/2023

Now that the Full Snow moon is here, I can count down til the Full Moon in March, this year on…
6 hours ago
John Sheehan commented on Jeffrey D. Abney's photo
Thumbnail

These Guys Were Aggressive……Caught Five of Them…..1/8/2023

"Yea Jeff Big Bass Sustenance and Big Catfish too I imagine."
yesterday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Caught 10 Giant Golden Shiners on Tipped 1/32 Ounce Jigs

"And even big enough to take a 1/32 ounce jig…..crazy!"
yesterday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
yesterday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Big Golden Shiner on the Silent Stinger

"I caught this one on a Tooty tie over ten years ago now….time flies!"
yesterday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

These Guys Were Aggressive……Caught Five of Them…..1/8/2023

"Nice John…..they are quite aggressive particularly in cold water……I see large…"
yesterday
Jeffrey D. Abney commented on Mikey-D's photo
Thumbnail

storm rolling in at the obx

"It’s crazy down there with so much water around you , it’s like sitting in the middle…"
yesterday
Troy Dorman commented on Mikey-D's photo
yesterday
John Sheehan commented on Jeffrey D. Abney's photo
Thumbnail

These Guys Were Aggressive……Caught Five of Them…..1/8/2023

"Here's a GS that took a snap Bean while searching for Blue Gills. Again, from a small back…"
yesterday
Bruce Tomaselli commented on Mikey-D's photo
Thumbnail

storm rolling in at the obx

"This one is my favorite."
Friday
Bruce Tomaselli commented on Mikey-D's photo
Friday
Bruce Tomaselli commented on Mikey-D's photo
Thumbnail

storm rolling in at the obx

"Fantastic photo!"
Friday
John Sheehan commented on Mikey-D's photo
Thumbnail

storm rolling in at the obx

"Wild looking Photo!"
Thursday
Mikey-D commented on Mikey-D's photo
Thumbnail

storm rolling in at the obx

"One of my buddies took these photos of a storm coming in at the outer banks of north Carolina the…"
Thursday
Mikey-D posted photos
Thursday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Winter Sunsets on the Albemarle Never Disappoint……1/29/2023

"Thanks Troy…..good luck to you guys in 2023….."
Wednesday
Troy Dorman commented on Jeffrey D. Abney's photo
Wednesday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Winter Sunsets on the Albemarle Never Disappoint……1/29/2023

"Thanks Bruce, waiting on Sir Walter Raleigh ’s prediction of an early Spring…my…"
Tuesday
Bruce Tomaselli commented on Jeffrey D. Abney's photo
Monday

© 2023   Created by Bluegill.   Powered by

Badges  |  Report an Issue  |  Terms of Service