Do you love big bluegill?
Two, maybe three seasons back I got a selection of micro poppers from Jim Cosgrove. I was impressed with them, and the fish hit the things with some gusto.. Heres an attempt at recreating them.
I need a sharper edge on my cutter, though; the edges arent smooth. Kinda crude, these should work.
Tags:
Albums: My flies
Comment
allen,david-have tried a lot of things.a drill will work but you have to use water.shell casings could work but brass or aluminum are soft and then you gotta push em out each time,the leather punch set is the way to go.they start popping out the side after you punch a few,the machining on the inside is a little rough on some so i use a stone on a dremmel and polish the inside.9 of 10 bodies come out clean.the biggest draw back was the hole thru the body .the slit method is slow and sloppy.i found the perfect tool quite by accident
.223 might be to small???? .357 might be better, but I'm not sure.
I've heard of some decent punches that have a chuck, so you can put them into a drill. Available at Harbor Freight. I've also heard of some folks using spent bullet casings, pop out the primer, fit it with a bolt, and a lock-washer and nut on the inside, should allow you to put it on a drill. You'll probably want to cut a hole in the spent brass, though, so you can get the resulting foam plug out.
Another person I know has a special attachment for his dremel, that turns his dremel into a mini-lathe. He cuts out a chunk of foam, attaches it to the dremel, and using a low speed, turns it, using an emery board to carve it.
THANKS SCRUFFY FOR THE HOOK SIZE , WAS JUST CURIOUS IS ALL ...... I tend to favor the 10's over the old 12's I used to use on the silents because of the wider gape on the hook.....
i tried that david,a leather punch,the kind you strike with a hammer works good.i run a dremmel around the inside to de burr anything rough inside the punch.you can get sets of these at the craft stores.layer your sheets of foam and lay on a board and whack with a hammer.i think the force of the blow helps cut em neater.i use jewelry punch pliers to make the small hole.i let sit a couple days to let the foam recover its shape
© 2024 Created by Bluegill. Powered by
You need to be a member of Bluegill - Big Bluegill to add comments!
Join Bluegill - Big Bluegill