Bluegill - Big Bluegill

Do you love big bluegill?

This is an article I wrote about 6 or 7 years ago that I thought some of you guys might find helpful.

 


FLYFISHING FOR BREAM
By Cliff Hilbert


When I was in my teens in New Orleans my grandmother gave me my uncle’s old bamboo fly rod, now don’t get excited about the bamboo rod because it
was an el cheapo and a wet spaghetti noodle would cast better. I taught
myself how to use it and went down to the local lagoon and caught bream
on it using poppers. Some years later I bought a brand new fly rod from
Walmart (must have cost all of $25 including the reel and line, but
remember that this was the 60s). I used that one for years, mostly on
bass fishing, but every now and then I went bream fishing with it using
poppers.

About five years ago I bought my first good fly rod, a 6/7-wt, 9’ St. Croix Imperial from Jim Green at Backcountry USA in
Tyler. I used that for bass, bream and trout fishing (I was just
learning the wonderful world of wading for trout). I asked Jim about a
better rod for bream and he suggested a 7’, 3-wt. St Croix Imperial,
which I bought. Now I was armed for battle! While at the shop I was
looking at Jim’s bream flies and saw a number of them weren’t poppers
(imagine that!). I bought several of them and began to use sinking flies
(wets) for bream for the first time in my life. My favorite was a
Cypert-type minnow imitation which I caught a lot of bream on, including
my first state fly fishing record – a .23 lb longear sunfish.

About two years ago I began to use some of my trout flies for bream, mostly
prince nymphs and pheasant tails, and found out that the bream
absolutely loved them! I learned that many of the bream didn’t come up
very shallow, and started using flies like a #12 bead head prince nymph,
#12 copper johns # 12 bead head red squirrels and others like that
which would sink fast. My catch rate and fish size went up dramatically.
I also use bead head caddis pupa, zug bugs, scuds and bead head wooly
buggers for bream. Bream feed mainly underneath the surface and they
feed mostly on micro-organisms and insect pupae and larvae, just like
trout. Of course they feed on topwater insects, but that is not a main
part of their diet.

I rarely use a tapered leader for bass or bream fishing, and I have no trouble at all getting the flies to cast
correctly. Most of the time I use 5 lb tippet material for a leader
because tippet material is usually thinner than monofilament and thus it
sinks faster. In bream fishing you don’t need the fly to alight on the
water with very little disturbance. Bream are naturally curious and are
drawn to a disturbance in the water. So, if a fly makes a nice splash
when it hits the water it will not scare away the fish. To the contrary,
it will excite them and draw them in. Ask any scuba diver who has
watched fish behavior and he will tell you the same thing, bream are
curious creatures and drawn to disturbances, much like people, ambulance
chasers being a prime example (no, I’m not talking about attorneys,
although the shoe may fit some). Recently at Lake Athens I lost several
large bream because they broke my 5 lb tippet material I was using. No,
they weren’t THAT BIG, but the leader was getting frayed because of the
constant rubbing against vegetation and boat docks, and it would break
easily. I switched to a 10 lb mono for a leader and I didn’t lose any
more fish after that. Bream are not leader-shy, and you can increase the
size of the leader and it will not bother them. I don’t use long
leaders either. Most of the time my leaders are as long as the rod or
shorter.

Ok, that’s what I use, now for how I use that equipment. When I’m bream fishing I usually fish in coves, big and small, although
that’s not a rule because I do fish out on the main lake as well. I try
to fish the edges of vegetation, most of the time in 2’-5’ of water.
Bream use the vegetation to hide in, and they will come out of it to
attack food. If the vegetation is not heavy and I can cast into it
without getting tangled in it on every cast, then I will try to cast the
fly into those areas. Depending on the depth, I may let the fly sink
for 2-3 seconds before I impart action to it, or I may begin to give it
action as soon as it hits the water. Rarely will I fast-strip the flies
in. Most of the time I just strip in 1”-3” of line at a time, just to
give the nymph a little movement. If I strip it in 2’ or so and haven’t
gotten a hit, I recast it to another spot. If the fish were interested
in it they would have hit it by then. If I get a hit I will usually cast
back to that spot at least once or twice more. If I catch a fish, I’ll
cast back there several times. If I come upon an area of shoreline that
has no vegetation or structure, I don’t waste my time with it because if
there is no place for the fish to hide then they won’t be there.

If I spot a hole in the vegetation where I can cast the fly and work it
for a couple of seconds, then I’ll cast it into that hole. The new
public waters state fly fishing record redear I just caught at Lake
Athens on July 1, .85 lbs 10.5” x 10.2”, was that exact scenario. I saw a
2’ opening in the vegetation very near the shoreline so I cast the
Copper John up into it and immediately the redear hit it. Now a #12
Copper John doesn’t hit the water gently and sink slowly, it hits the
water with force and is propelled downward very quickly. The fish are
very, very quick to attack something small and fast-moving like that.
They are much quicker than we think. They react out of instinct. That
was not a wary old bream that slowly studied the fly before he hit it
because he didn’t have time, he hit it as soon as it hit the water. On
July 4 I was fishing at a private lake with one of Gene Bethea’s purple
and gold LSU clousers he tied for me and I cast it into a 4’ hole in the
vegetation in the middle of the lake in water that was 7’ deep and
caught a 1.3 lb redear, a new state record for private waters. I let it
sink for 4-5 seconds, gave it a twitch and the fish took it. Openings in
the vegetation are great places to fish because the fish can hide in
the vegetation and attack anything that comes within range. Sure, you
get tangled in the grass , but that’s just part of fishing.

If I see a log lying down in the water, I’ll work my fly alongside that log
for as far a distance as I can. The fish will be under the log many
times, it is a place for them to hide. The state record longear sunfish,
.44#, I caught on Lake Jacksonville last year was under a fallen tree I
was casting to in the back of a little cove. If I see a big tree or
brush pile in the water, I’ll cast as close to it as possible, let the
fly sink as far as possible without tangling in the brush, then slowly
twitch it away from the pile. Many times the fish will come out of their
hiding place to attack the fly. If one comes out, then usually more
will come out. If I get tangled in the pile, then I’ll go get the fly if
possible. I don’t worry too much about messing up that particular spot
because there are many more places to fish on the lake. If I see a stump
in the water, I’ll cast to the stump and let the fly sink next to it.
Stumps are hiding places for fish.

I fish boat docks for bream and I catch a lot of bream from around the docks. I try to side-arm cast
my fly up under the docks and let them sink for several seconds. Much
of the time when a fish hits it you will see just a very slight twitch
in the line as it’s sinking (I try to watch the leader as opposed to the
fly line) or you’ll just see the leader moving in a direction it
shouldn’t be moving. And, many times, you won’t even know you have a
fish on until you begin to twitch the line to give the fly a little
action and you notice a little tension on the line which shouldn’t be
there, it may be a fish. I cast alongside boat docks also and let the
fly sink for a few seconds, depending on the depth of the water, then
begin to twitch it towards me. I will cast into the boat stalls as well,
as far up into them as I can, then let the fly sink. Sometimes I will
use a #14 beadhead Prince Nymph, Zugbug, scud, etc, other times I will
use a #10 or #12 beadhead nymph, just depending on how fast I want the
fly to sink.

If you were to ask me how I choose a different size fly over another one, most of the time I would tell you that it is just
a feel I have for a certain size or fly at that time. Sometimes I’m
right, sometimes I’m wrong, fishing is a trial and error thing. If I
find a fly that is working for me, I’ll stick with it. If it’s not
catching fish, then I’ll try something else. If I try several flies and
nothing is working, then I’ll try and change my tactics from a slow
retrieve to a fast one, from fishing shallow to fishing deep, from one
color to another one. There are times when they simply aren’t in a
feeding mood and nothing you throw at them will work, that’s when I go
home (hey, I’m not a glutton for punishment).

Bed fishing during the spawn is, without question, the most fun time of the year for bream
fishing. Most of the beds you’ll never see, usually because they are
too deep for you to see, except in very clear water lakes. But when you
do find them in shallow water the fishing is usually fantastic. My
favorite is using live crickets but, since this is about fly fishing,
I’ll discuss that instead. If the beds are very shallow I’ll use a
smaller and lighter fly, if they are 3’-6’ deep I’ll use a larger,
heavier fly to get it down much quicker. I find that in bed fishing,
generally the fish like it on the bottom, being worked slowly across
their nests. That’s not always the case, but I’ve had most of my success
like that. When I’m fishing like that I rarely watch the line. Instead,
I know the fish has taken it because when I’m working the line in there
will be a tension on it that shouldn’t be there. The easiest way to
tell you have a fish on is when they take the fly and run off with it,
that’s usually a pretty good indication you have a fish, lol.

This year, for the first time, I used dry flies some of the time while I was
fishing the beds. It was fun and I did catch a lot of fish like that,
some very nice ones. But most of the time they would just come up and
slap at the fly to kill it, those are typically smaller bream. I’m sorry
guys but when I see a fish hit the fly, I’m simply not patient enough
to wait until I feel the tug on the line to set the hook. I set the hook
when it slaps at the fly, or at least try to, thus I miss most of the
topwater strikes. With sinking nymphs I don’t miss near that many, and I
catch many, many more and bigger fish with wets than I do with dries –
this from a guy who had never used anything but dries until about four
years ago. I’m not knocking using dry flies, but I’ve found that,
personally, I am much more successful with sinking nymphs than with
dries.

Now when I do use dry flies, I don’t let them sit motionless while I smoke a cigarette, mainly because I don’t smoke. I
give them a fair amount of action on the surface. Many times when a dry
fly hits the water it will immediately be hit by a bream, which throws
out the notion that you have to let it sit motionless until you die of
boredom. I don’t let my topwater bass bugs sit still for more than a
second or two, and I don’t let dry flies for bream sit motionless for
long. I’m aggressive in fishing just like I am in most others things,
and I like to see action in the flies. I’m not going to sit around and
let spider webs grow on me just to give the bream time to decide if he
wants my offering or not. But that is my personality, others are
different and like slow fishing – if that’s what they enjoy, well that’s
great for them, each to his own.

Many people like to use spiders when fishing for bream. I’ve had several given to me by friends
who tie flies (I haven’t taken up that addiction yet and never will –
there is a fine line between a “hobby” and a “mental illness”, just
kidding guys), and I’ve used these spiders, the sinking variety mostly,
and have caught some very nice bream on them. They are an excellent fly
and do work well. Bream seem to love those things with plenty of legs
dangling all over the place.

Before I close let me add this, my third rod is an 8 ½’, 4-wt. St. Croix Avid, which I bought for trout
fishing. But when I know that when I’m going bream fishing on a windy
day, I take this rod along because it handles the wind better than my
7’, 3-wt. If I know that I am going to be fishing deep for bream all day
and using larger and heavier flies, I also use my 8 ½’, 4-wt. That way I
won’t come home with welts all over my back and the back of my head
from the fly hitting me (that hurts you know!)

One last thought. We have all heard of those “wily old bream” who have gotten large in
their old age because they are so smart. Bull!! Fish are stupid, they
are not wily, nor are they smart. They feed on instinct, they react
quickly to a disturbance in the water – if they didn’t, then they would
go hungry because the others bream would beat them to the punch. If they
haven’t been caught yet, it is simply because no one has ever thrown a
hook their way with something that interested them. When was the last
time you saw a big yellow spider with long white legs crawling across
the top of the water? Yet you fish with yellow poppers and spiders with
white legs and some fish will hit them, others won’t. Does that mean
that some fish are smarter than others? No, it simply means that that
fly didn’t trigger the feeding instinct in some fish at that time, the
next day it might. Why did that wily, wise and discriminating 9 lb bass
at Fork this year hit my chartreuse popping bug (which looks like
nothing she has ever seen before) after living all these years? Because
she was so wily and smart? No, she hit it out of instinct, a reactionary
strike. She was lucky, because I kissed her then let her go back home,
but she sure wasn’t smart. (She gave me a real sweet kiss too, mmmmmm.)

None of the above are hard and fast rules. These are the tactics that I like
and that work for me. If you do things differently and catch fish, then
good for you, keep using what you’re comfortable and successful with.
__________________

Views: 13851

Reply to This

Replies to This Discussion

Cliff, This is a great artical.  You have named several of my favorite nymph's!!!! I don't think I ever met a nymph I didn't like. One I didn't recognize is the Cypert type minnow pattern. Would like to see one. Again GREAT POST!!!!!
Thanks Greg!  I don't think the bream have ever met a nymph they didn't like either. I'll see if I have any of those Cypert-type flies left and take a picture of one for you.
Greg, I looked in my fly boxes and I don't have any more of those Cypert-type minnows. The guy I use to buy them from is not around anymore and I don't tie flies, so I guess I'm not going to be able to help you on that one.
Cliff , is this the fly?
Yep, that's the one, Greg. Jim tied them in different colors.

Cliff, I have been doing a ton of learning about fly fishing this fall and was starting to get aggrivated with all the miss info out there, I read you article and thought it was great, Just what I needed to here, "Its not as complicated as some like to make it out to be",,

Thanks a ton for putting this out there for peoploe to read...

John

 

I'm glad it helped you, John.  That's why I wrote it - to help people catch more fish. People can take the fun out of fly fishing by trying to make it much more complicated than it is. I like to make it as easy as possible so that more fishermen can enjoy it. It is a fun sport!
I have found a link with the how to on that particular fly. Here it is: http://texasflyfisher.blogspot.com/2008/09/tying-texas-favorite-cyp...

RSS

Latest Activity

dick tabbert commented on Jeffrey D. Abney's photo
Thumbnail

Had to Pause on This Evening……11/22/2024

"What a beautiful site to behold."
29 seconds ago
John Sheehan commented on John Sheehan's group Multi Panfish
"hit a spin Jig.9""
Nov 29
Jeffrey D. Abney posted photos
Nov 28
John Sheehan commented on John Sheehan's group Piscatorial Pursuit of Perch
"Fall Perch on big Crank Bait:"
Nov 26
John Sheehan commented on John Sheehan's photo
Nov 26
John Sheehan commented on John Sheehan's group Piscatorial Pursuit of Perch
"It amazes me how big a bait a late Summer/ Fall Perch will take! "
Nov 26
John Sheehan commented on John Sheehan's photo
Thumbnail

octcbp2

"It amazes me how big a bait a late Summer/ Fall Perch will take! "
Nov 26
John Sheehan commented on Wade Jones's group Crappie Crew
"2024 Crappie Fall catches from shore. Live Grubs, Gulp 1" Minnow, 2" paddle Tail Minnow…"
Nov 26
John Sheehan posted photos
Nov 19
John Sheehan posted photos
Nov 16
John Sheehan posted photos
Nov 14
John Sheehan commented on John Sheehan's photo
Thumbnail

11cupsawc

"Crappie have always impressed me with the way they look! A very fond memory is the first one I…"
Nov 13
Jeffrey D. Abney commented on John Sheehan's photo
Thumbnail

11cupsawc

"More beautiful golden Fall colors on the Black Crappie…..nice fish!"
Nov 12
Jeffrey D. Abney commented on John Sheehan's photo
Thumbnail

cupsawbg9bs

"Nice gill on the beetle spin!"
Nov 12
Jeffrey D. Abney commented on John Sheehan's photo
Thumbnail

cupsawc

"Like the calico colors of the Fall…..nice crappie John!"
Nov 12
Bruce Tomaselli commented on John Sheehan's photo
Nov 11
John Sheehan posted photos
Nov 10
John Sheehan commented on John Sheehan's photo
Thumbnail

STCrappie

"You bet Bruce! Fishing for an hour to an hour and a half each day I 've been getting three or…"
Nov 10
Bruce Tomaselli commented on John Sheehan's photo
Thumbnail

STCrappie

"About a dozen of those would be great! Nice crappies."
Nov 10
John Sheehan commented on John Sheehan's photo
Thumbnail

466097223_10236349245411317_8266863466993619288_n

"Top: Shimano Sensilite 5'6"Rod /Daiwa Spinmatic Reel. Trilene clear xl 2# test…"
Nov 9

© 2024   Created by Bluegill.   Powered by

Badges  |  Report an Issue  |  Terms of Service