Bluegill - Big Bluegill

Do you love big bluegill?

Views: 522

Replies to This Discussion

This rotisserie motor is what I use to power my dryer.  I keep my poppers rotating until the finish dries/sets up other wise it will sag.   The pour-on in the picture has a real long pot time but takes a long time to set up, I will let it turn four to six hours and then let it dry overnight. It drys very clear and I haven't had any issues with tackiness after 24 hours.  As you can see it was very simple to construct the dryer. I cut 3 circles from scrap wood, the diameter was the same as a 12 ounce coke can, then drilled a hole in the middle of the circle then glued it to a dowell.  the foam came from an old coozie (canned drink insulator sleeve) and was slipped on and is easy to replace when it starts getting worn.  Commercial dryers turn a little faster than 1 RPM but this seems to do the  trick.

Great stuff mark thanks for sharing.

I have a rotsserie motor I use for various things, rods and occasionally bug, but it turns about 6 rpm's .  I have known of guys using the motor from microwave turntable for similar purposes, which I think are a little quieter than what I have experienced with rotisserie motors.  That looks like a very well designed and versatile setup you have there.

I used a microwave oven plate turner motor out of an old broke oven. It works just fine but I just have one disk attached for holding the poppers.

What a great idea, we have some great minds here.

here's my paint area. my dryer is in the back left.

sorry about the picture its the wrong one. I don't think it loaded anyway.

I guess the picture answered my question. Is that finish a polyurethane. Ive been using epoxys and haven't really found one that does what I want.

the finish pictured above is a 2-part epoxy "envirotex lite"

I have a friend that likes "BSI" two part epoxy that has a 30 minute cure time I think I will give that a try because some times I get tired of waiting for the "envirotex lite" to cure.  

Also popular for finish is a glue called "Liquid Fusion" with the added advantage of  no mixing required.

When I am playing around with a new design I will use uv light cured finish that dries almost instantly; but not practical if  you are doing 40 poppers at a time.

i think a product called liquid fusion is a good epoxy alternative.i think it also must be dried on a wheel

clever design John; very appealing to the eye!! bet you had no problem selling them!!  I sold my turner with a rod wrapper i built on craigslist last Saturday replaced it with a CRB rod turner that easily adapted to a fly dryer.  If I came across some motors like yours with those clean lines I would make a permanent turner dedicated only to fly tying.

RSS

Latest Activity

John Sheehan commented on John Sheehan's photo
Thumbnail

Spoon Bass

"Thanks Jeff!"
10 hours ago
John Sheehan commented on John Sheehan's photo
Thumbnail

Rattle Trap Bass

"Yes, the front one at least! What do you suppose happened there ,Jeff?"
10 hours ago
Jeffrey D. Abney commented on John Sheehan's photo
Thumbnail

Rattle Trap Bass

"Another good bass…..his dorsal fin is almost gone completely….."
10 hours ago
Jeffrey D. Abney commented on John Sheehan's photo
Thumbnail

25"+Spoon Pick

"Big chain, very nice!"
10 hours ago
Jeffrey D. Abney commented on John Sheehan's photo
Thumbnail

Spoon Bass

"Nice bass John!"
10 hours ago
Jeffrey D. Abney commented on John Sheehan's photo
10 hours ago
John Sheehan added a discussion to the group Lure History
Thumbnail

Discontinued Lures

Some of my favorites I can't find anymore: Acme Fash King Flutter Spoon, Eppinger Flutter Chuck,…See More
yesterday
John Sheehan posted photos
yesterday
John Sheehan commented on John Sheehan's photo
Thumbnail

25"+Spoon Pick

"25+inch Pickerel was best of the 13 Fish caught today a day after the Worm Moon. Two Bass and the…"
Tuesday
John Sheehan commented on dick tabbert's photo
Thumbnail

IMG_0186

"1/16th oz., good!"
Tuesday
dick tabbert commented on dick tabbert's photo
Thumbnail

IMG_0186

"These are my last build. I added more colors."
Tuesday
dick tabbert commented on dick tabbert's photo
Thumbnail

IMG_0186

"No Jon I went with the 1/16 oz jig heads so I could have a larger hook for crappies. It's a #4…"
Tuesday
John Sheehan commented on dick tabbert's photo
Thumbnail

IMG_0186

"Colors are great !"
Monday
John Sheehan commented on dick tabbert's photo
Thumbnail

IMG_0186

"Thats a good Crappie size! Are they 32nd Oz Jigs?"
Monday
dick tabbert commented on dick tabbert's photo
Thumbnail

IMG_0186

"They are right at 2" long."
Monday
John Sheehan commented on dick tabbert's photo
Thumbnail

IMG_0186

"I Can see Crappie and Bass chomping on them, Dick!"
Sunday
dick tabbert commented on dick tabbert's photo
Thumbnail

IMG_0186

"I made these up for crappie in mind. They might be a little big for gills unless it a bigger gill."
Sunday
John Sheehan commented on dick tabbert's photo
Thumbnail

IMG_0186

"What Species you got in mind for these great Minnow ties , Dick?"
Sunday
dick tabbert posted photos
Sunday
John Sheehan commented on Sam k.'s group Trout Bums
""Trout Season opens April 6th 2024 in New Jersey. Waters are runnin' high for…"
Sunday

© 2024   Created by Bluegill.   Powered by

Badges  |  Report an Issue  |  Terms of Service