Bluegill - Big Bluegill

Do you love big bluegill?

A collection of ideas comments etc concerning all electrical rigging from lights to transducer mounting for kayaks... theres alot of good ideas out there published and unpublished floating around... lets pool them together here.

Views: 384

Replies to This Discussion

....a great idea mounting a transduce using a magnet mount

... Great idea for a battery box for sonar lights etc


source for the utility box

http://www.academy.com/shop/pdp/action-products-sport-utility-dry-b...

i'm really impressed with this application... but the box is a little big for the Ascend D10T... might be just right for the Nucanoe.

Great idea, Ken!

thanks David .... seeing i was in that arena right now working on the kayak... i thought i could get a head start and help my fellow kayakers along and maybe get some help along the way also.

thru the hull mounting technique... im exploring all options here.

Shoot-through-hull is the only way to go with a plastic yak.

PS "through hull" means exactly that - the installation is made through the hull... as in cutting holes....
People with boating backgrounds cringe when they hear this term misused.

So far David I am leaning that way…and heres why…. One of the main reasons I fish out of the kayak is vertical jigging… optimally vertically jigging is at its finest hour ice fishing… it is close and controlled… the next technique up in open water is vertical jigging with a kayak anchored with a anchor trolley or a controlled drift with a windsock. My anchor trolley is on the right side where I like it… so you are fishing from the right side with short rods. Mounting the transducer on the right side now come into interference with the trolley. So shooting thru the hull is probably going to be my best option and is so far... the temp is really no big deal.. i have a little digital meat thermometer i have with me all the time.. However ive been considering recently the upgrade to a Nucanoe so that factors in. like you said give up the transducer or offer the whole sonar unit in the resale…. Sheeesh im going to have to put this on a spreadsheet. lol

Well, inside hull mounting, when done right, suffers virtually NO LOSS in depth or accuracy.
When I was looking to install the one you sent me, that's what I learned. In practice, I found this to be true.
Piercing the hull to expose the face of the transducer itself to the water isn't needed.
I would mount as near to the centerline as possible, too. I put the thing right under my seat. It is protected there and right on the centerline.

i heard like you say there should be no loss as long as there is no air bubbles between the transducer and hull material. i know you had good luck with your install. looking at my deck there is a nice flat spot where i would be able to cut a hatch to get at the interior access... after that it would be an easy install. 

yeah i would never cut into the hull

the other option is mounting it off the transom but my presentation would be out of the cone angle for a short depth

I find it odd that there is no hatch already.
But you can purchase watertight deck hatches that will fit anywhere you want to install them.

there is one hatch and it has a dry bag under the lid...

installing a hatch sounds like no problem if i go thru the hull install.

RSS

Latest Activity

Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Cody admires a Bluegill Eater....

"We've had fun over the years....."
2 hours ago
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
2 hours ago
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Can't Go Wrong With a Coangler Like This One......LOL

"My grandson turns 11 tomorrow......."
2 hours ago
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
2 hours ago
Jeffrey D. Abney posted photos
4 hours ago
Jeffrey D. Abney replied to Slip Sinker's discussion 2018 Master Angler Record Breaking Years back to back 2017-18 Slideshow
"Nicely done Slip......these are all great fish in my book!"
4 hours ago
Slip Sinker posted a discussion
10 hours ago
Jeffrey D. Abney posted photos
yesterday
Jeffrey D. Abney posted a status
"Went for a couple hours behind the front.....fishing was slow yet for a couple citation Fliers in 47 degree water still down a foot or so.."
yesterday
Jeffrey D. Abney commented on Mikey-D's photo
Thumbnail

20200118_125844

"Very nice Mikey-D......these fish look ready for an early Spring just like me! We're getting…"
Sunday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Best of The Decade.....2010-2019

"Thanks Troy......years ago a failed attempt to develop rural parts of the Albemarle created some…"
Sunday
Jeffrey D. Abney commented on Jeffrey D. Abney's photo
Thumbnail

Best of The Decade.....2010-2019

"Thanks Tooty....you bethcha'"
Sunday
Troy Dorman commented on Jeffrey D. Abney's photo
Friday
DAVID L EITUTIS posted a status
"YA KNOW WHAT, VVVVVVERY SELDOM do I come on the site anymore and no one's on it.... is everyone that busy or just doing something else?"
Thursday
DAVID L EITUTIS commented on Jeffrey D. Abney's photo
Thumbnail

Best of The Decade.....2010-2019

"YES THEY SURE DO JEFFREY, ENJOY EM BEFORE THEY ARE GONE......"
Thursday
Mikey-D commented on Mikey-D's photo
Thumbnail

20200118_125844

"Thanks John we had a little bit of a warm spell here the action turned on a bit water temp is 43…"
Wednesday
John Sheehan commented on Mikey-D's photo
Thumbnail

20200118_125844

"Nice Job1 Still in limbo up here in NENJ ,ice isn't safe and haven't fished open water…"
Jan 21
Jen Nayfly replied to Leo Nguyen's discussion Be careful of a hot rolling scam
"So how do you remove your personal info from the net?"
Jan 21
Leo Nguyen posted a discussion

Be careful of a hot rolling scam

Be careful of a hot rolling scam (based off a number from Texas number 316-768-4274 or any other…See More
Jan 21
Mikey-D posted a status
"got to get out in the lake Sat. these are some of the nicer fish caught"
Jan 21

© 2020   Created by Bluegill.   Powered by

Badges  |  Report an Issue  |  Terms of Service